Programming APX 7000 UHF R-2 VHF with APX CPS

[Code3Services]

Greetings all,
I am using Motorola APX CPS to program my APX 7000 handhelds. I have the majority figured out and programmed, however, there is one frequency I am trying to use as a receive only that requires a NAC and I can not figure out how to program the NAC code in. I was reading other forums, and they mentioned the ASTRO, and the only option regarding ASTRO this programming seems to have is non-ASTRO. Any help would be appreciated.

 

[rescueman433]

Greetings all,
I am using Motorola APX CPS to program my APX 7000 handhelds. I have the majority figured out and programmed, however, there is one frequency I am trying to use as a receive only that requires a NAC and I can not figure out how to program the NAC code in. I was reading other forums, and they mentioned the ASTRO, and the only option regarding ASTRO this programming seems to have is non-ASTRO. Any help would be appreciated.

Make a new conventional system that is Astro. Make a conventional personality that is Astro or mixed mode and add your frequencies and NAC.

Hopefully your radio has the options you need in the flashcode too.

 

[petnrdx]

I recall where some of the CPS you had to program the "channel" (mode) as a transmit, set the NAC's and freqs as needed.
THEN go back and select RX only.
The NAC should stay as set.
Cumbersome, but I *think* ASTRO 25 and ASTRO Spectra worked that way. I am pretty sure Astro Spectra worked that way.
Worth a try.

 

[Code3Services]

I recall where some of the CPS you had to program the "channel" (mode) as a transmit, set the NAC's and freqs as needed.
THEN go back and select RX only.
The NAC should stay as set.
Cumbersome, but I *think* ASTRO 25 and ASTRO Spectra worked that way. I am pretty sure Astro Spectra worked that way.
Worth a try.

I can not get to a point to enter the NAC in either mode.

 

[Code3Services]

Make a new conventional system that is Astro. Make a conventional personality that is Astro or mixed mode and add your frequencies and NAC.

Hopefully your radio has the options you need in the flashcode too.

I made a new conventional system. However, there is nowhere to turn on the ASTRO.

 

[KevinC]

What's your flashcode?