ProScan: Programming GMRS Repeaters

[Aviation_Scanner]

I have a couple of GMRS repeater frequencies that I will upload to my GMRS radio once the proper programming cable gets here.

To monitor them on my SDS-100, all that I would need is the RX (Receive) frequency & tone, is this correct or do I need some other information?

 

[mmckenna]

I have a couple of GMRS repeater frequencies that I will upload to my GMRS radio once the proper programming cable gets here.

To monitor them on my SDS-100, all that I would need is the RX (Receive) frequency & tone, is this correct or do I need some other information?

Program in the repeater Transmit frequency, that is, the 462.xxx frequency that the repeater transmits on.
You can program in the tone for the repeater if you know it. Or leave it set for carrier squelch and you'll hear everything on that frequency.

 

[Aviation_Scanner]

Program in the repeater Transmit frequency, that is, the 462.xxx frequency that the repeater transmits on.
You can program in the tone for the repeater if you know it. Or leave it set for carrier squelch and you'll hear everything on that frequency.

Right, got it mixed up.
I do know the tones for the repeaters I will be monitoring, so that will not be an issue.
Thanks for the clarification