Programming Phoenix/Mesa Fire into a Pro 96

[drompalo]

Hi All,

I must be going out of my mind here so I can use some help. I am using the following frequencies to hear these channels but my Pro-2096 is not picking up any activity. I have them set to FM mode and can hear them fine on the RR website or the iPhone but nothing on the scanner. What can I be doing wrong?

154.340 Mesa FD Ch1 154.235 Mesa FD Ch2 153.950 Mesa FD Ch3 154.325 Mesa FD Ch7
154.890 OLD PhxPD Ch1 154.430 Phoenix FD B1 154.085 Phoenix FD B12 155.955 Phoenix FD B2
154.190 Phoenix FD Ch1
151.370 Phoenix FD Ch10
154.025 Phoenix FD Ch11
154.250 Phoenix FD Ch2
154.070 Phoenix FD Ch3
154.280 Phoenix FD Ch4
153.830 Phoenix FD Ch5
154.145 Phoenix FD Ch7
153.770 Phoenix FD Ch8
155.670 Phoenix FD Ch9

 

[AZScanner]

Do other frequencies work? What happens if you tune 162.550?

I have a PRO-96 that is completely deaf. It won't pick up a thing. You might need to send it in for repair. I'm holding out for the funds to buy a PSR-500 instead of fixing the brick.

-AZ

 

[drompalo]

Pro 96 Issues

That Frequency comes in just fine (162.550)....it seems I get most all Analog frequencies but not the ones listed above...any other ideas anyone???

 

[drompalo]

Problem Solved

I took my scanner to an upstairs room in my house and the frequencies come in just fine. It looks like it was just a weak signal issue or something causing interference downstairs.

Thanks for all your help!