Getting >rror Code Heap Error 22401F 2247 i I touch any key
Radio Shack 106
- Thread starter node1
- Start date
DeeEx
Member
Might a key(s) be stuck down? Go through each and make sure it rebounds properly.
This thread from a few years ago dealt with a PRO-106 displaying a heap error, though the error code is not the same as what you are getting. It also links to an even older thread on the same topic. Might be worth reading through.
Good luck.
forums.radioreference.com
Good luck.
Pro-106 Throwing a Code...Need Help!
I have owned a Radio Shack Pro-106 for many years without issue. Last month while using a search feature, I was stopped by a code on the screen as follows. HEAP ERROR 23CD1F : 23D4 I use this scanner in conjunction with my ham radio work. Could someone please explain how to rid myself of this...
see also regarding discussion of: Heap Error 22401F 2247
forums.radioreference.com
Grecom PSR-500 hand held scanner
Hi Everyone Can somebody help me? When I turn on my scanner it says nothing enabled. Then when I hit the program button a code comes up 22401F-2247 and I cant figure out what to do next Any advice Rich
As shown in the above linked threads, heap errors are usually caused by a programming error such as talkgroups not assigned to a trunked system or no scanlists (aka "banks") enabled. Did you recently change your programming?
Thank You I belive that is the problem I had programed a TGIF but have not tried anything with it two weeks ago. Looks like I have reprogram the scanner. It dosn't respond to anything.
tvengr
Well Known Member
Are you programming manually or using software? You are far less prone to making errors when using software.
In past years manually I brought the software but have never used it. Trying to find out howto use it.
When I used to encounter this with my GRE PSR 500, it meant some of the talk groups & TSYS were not connected. In other words, you can program the TSYS without the talk groups. There is a way to find the affected TSYS and fix things.
