Radio Shack Pro-2032 200 channel scanner.

[fairchiefisback]

I have a Radio-Shack Pro-2032 Scanner (200 Channel) and a Realalistic 2001 (16 channel)
Scanner. A few of the channels I was used to getting have gone digitial. I was wondering how I can go about coverting the signal on the channels involved to digital. i and relatively new to the scanner scene. If there is anybody out there that can help I would really appreciate it. Thank you everyone for your time. And look forward to receiving and reply to the above problem.



Yours in waiting for reply

Fairchiefisback

 

[Tom-H]

What you're asking to do is not possible. In order to hear these digital comms (they must be APCO-25 signals also), you need to buy one of the new digital decode capable scanners. AFAIK, the following scanners are the only ones out there that will decode the APCO signals.

1) Uniden BCD296T
2) Uniden BCD396T
3) Uniden BC796D
4) RS PRO-96
5) RS PRO-2096

The Uniden models BC250D and BC785D will also decode limited APCO signals, however, these radios are now considered obsolete, and were not added to the above list because of this.

 

[fairchiefisback]

response to tom

i thank you for the response to my question. if you want to email me or chat with me sometime my email address is darren_broderick@homtail.com. Look forward to hearing from you and chatting with you online.


thanks again.

Fairchiefisback