SDR# DSDPLUS plugin help

[OHIOSCAN]

Spent past few days trying to get DSDPLUS plugin working in SDR# with no luck using these settings.
Any ideas what I am missing, I hear the digital audio just not getting piped into DSD

SDR# R1418
DSD INTERFACE PLUGIN (latest build)
Audio Input set to: Virtual Audio Cable set to Line 1 (Default Device)
Audio Out set to Default Out
Audio filter unchecked

Plugin Settings
Checked Enable aux output Audio Device
Set path to DSDPLUS.EXE (build 095)
Set Input/Output
Input audio device 1
Output audio device 1

 

[mrlindstrom]

Are you able to get it working now without the plugin? Sdr# piping the audio straight to DSDPlus?

 

[OHIOSCAN]

Not sure what you mean, SDRSHARP plays other audio fine, DSDPLUS works fine in Unitrunker.
I start the DSDPLUS plugin everything launches but the audio just not piping into DSD.

 

[mrlindstrom]

Sdrsharp has the option to choose where to send the audio without any type of plugin. Have you tried setting that to your virtual audio cable? Make sure "Filter Audio" is not checked.

 

[OHIOSCAN]

I set SDR# audio out, to Virtual Audio 1, parked on CC, then launched DSD CMD line typed DSDPLUS -I1 -o1 and no activity.

 

[OHIOSCAN]

Playing with it some more, now in SDR# DSDPLUS plugin, I get garbled audio along with the Data stream. Analog audio shows up in the DSD Source Audio window, so audio appears to be piping thru. In FMP these P25 Conv channels sound fine

 

[Voyager]

If you are using the plugin, don't worry about the AUDIO part of SDR#. The plugin has its own audio output which is independent from the main program. The benefit is that you can mute the speakers but DSD will still decode, so you don't have to listen to the data. In fact, you will be better off muting the SDR# output so you don't get dual audio paths depending how you have the main audio routed. And/or make sure your SDR# audio is not using your VAC.

That said, was the plugin ever updated to work with .NET 4.6? That may be the issue.

(and if it was, great, as that's one of my most-used plugins)


Also, what is the output level on the plugin? I find a little over half volume works well.

 

[OHIOSCAN]

Plugin

If you are using the plugin, don't worry about the AUDIO part of SDR#. The plugin has its own audio output which is independent from the main program. The benefit is that you can mute the speakers but DSD will still decode, so you don't have to listen to the data. In fact, you will be better off muting the SDR# output so you don't get dual audio paths depending how you have the main audio routed. And/or make sure your SDR# audio is not using your VAC.


That could be part of the problem, I did not know the audio was separate, I am pretty sure it was updated, after 4.6 not positive.

Yep have to volume at 50%

Thanks

 

[CaptainNemo]

unsupported command line parameter

Hi all.
I finally subscribed fastlane, so I migrated from 1p101 to 2p39.
Running dsdplus from sdr# vasili's plugin I get an error about -dR parameter.
I tried from .bat and i realized -dR and -dH are no more supported...

I like to use that plugin... so... any known circumvention?
TNX in advance.
Gio.

 

[OHIOSCAN]

http://forums.radioreference.com/vo...ce-plug-sdr-use-dsd-v2-29-fl.html#post2687887

This thread has a patch, should fix it

 

[CaptainNemo]

problem solved

Fix up and running.
TNX
Gio