SDS100/SDS200: Sds 100 gone deaf

XLR8TOR

Member
Joined
Dec 22, 2021
Messages
15
Reaction score
2
Location
NWI
OK I added and pruned the hoosier safe-t, now I'm getting some chatter! I previously used my zip code and then the database, and hoosier safe-t showed up on the scanner, but never heard anything. ¯\_(ツ)_/¯.

Thanks for your help!
 

XLR8TOR

Member
Joined
Dec 22, 2021
Messages
15
Reaction score
2
Location
NWI
You have so many systems in the favorites list that you are lucky if you hear anything. Try holding on the Lake Co system. I suggest you change the filter from Global to Wide Invert for the Lake Co site. I often have good results using that filter on sites with 700 MHz frequencies. As Whiskey3JMC stated, Porter Co uses the Indiana Project Hoosier SAFE-T statewide trunked system.

Any systems you think I should prune? Mostly interested in police/fire in porter county, sometimes Laporte and lake, if I am in range.
Filters can be changed for each frequency?
 

tvengr

Well Known Member
Joined
Feb 10, 2019
Messages
12,064
Reaction score
5,325
Location
Baltimore County, MD
Any systems you think I should prune? Mostly interested in police/fire in porter county, sometimes Laporte and lake, if I am in range.
You can give each system a quick key and turn the systems on and off as needed. That way you can leave all of them programmed.
 

I_Am_Infinite

Member
Joined
Oct 28, 2021
Messages
425
Reaction score
187
Location
Sumava Resorts, IN (Newton County)
Any systems you think I should prune? Mostly interested in police/fire in porter county, sometimes Laporte and lake, if I am in range.
Filters can be changed for each frequency?
Lake countys control channel is 774.71875. Porter Countys is 771.56875. I've never seen them change to anything else but it's always good to have all.

The porter county simulcast has Laporte county talkgroups on it so u will definitely hear them off that site along with all porter county talkgroups. Some ISP District 13 traffic, and ISP District 21 also. Among other stuff to.

I monitor both and use wide invert on my SDS 200 and it handles it good.
 
Top