Shared DSDplus - freq, group, siteloader and site files for Quebec

[bigears323]

this is the event log
2023/11/02 16:07:00 Freq=460.675000 Current network: 167
2023/11/02 16:07:00 Freq=460.675000 Current site: 167-1 Acces Comm Cote-des-neiges
2023/11/02 16:07:00 Freq=460.675000 167-1 neighbor: Site 167-2 Acces Comm Lac-Echo
2023/11/02 16:07:00 Freq=460.675000 167-1 neighbor: Site 167-3 Acces Comm Mont-Rigaud
2023/11/02 16:07:00 Freq=460.675000 167-1 neighbor: Site 167-6 Acces Comm Sorel
2023/11/02 16:07:00 Freq=460.675000 167-1 neighbor: Site 167-7 Acces Comm Montreal General Hospital
2023/11/02 16:07:00 Freq=460.675000 167-1 neighbor: Site 167-8 Acces Comm Covey Hill
2023/11/02 16:07:00 Freq=460.675000 DCC=1 167-1 neighbor: Site 167-2 Acces Comm Lac-Echo
2023/11/02 16:07:00 Freq=460.675000 DCC=1 167-1 neighbor: Site 167-3 Acces Comm Mont-Rigaud
2023/11/02 16:07:00 Freq=460.675000 DCC=1 167-1 neighbor: Site 167-6 Acces Comm Sorel
2023/11/02 16:07:00 Freq=460.675000 DCC=1 167-1 neighbor: Site 167-7 Acces Comm Montreal General Hospital
2023/11/02 16:07:00 Freq=460.675000 DCC=1 167-1 neighbor: Site 167-8 Acces Comm Covey Hill
2023/11/02 16:07:03 Freq=460.675000 DCC=1 Group call; TG=15800 [Medical Trans Nanuvik] RID=5819 Ch=7 4s
2023/11/02 16:07:07 Freq=454.400000 DCC=1 Group call; TG=13600 RID=3607 Ch=8
2023/11/02 16:07:09 Freq=454.400000 DCC=1 Group call; TG=15800 [Medical Trans Nanuvik] RID=5801 Ch=7 1s
2023/11/02 16:07:09 Freq=454.400000 DCC=1 Group call; TG=13600 RID=3607 Ch=8 1s
2023/11/02 16:07:11 Freq=300.000000 DCC=1 Loading Con+ site 167-7 [Acces Comm Montreal General Hospital]
2023/11/02 16:07:11 Freq=300.000000 Current network: 167

 

[dave3825]

I wanted to know if your site loader works properly since you set it up differently than what's described in the top of the file as far as the format..

 

[bigears323]

If I setup as your line one with (Con+, 171, 0, "Onevoice" Defines the system) on to my setup
eg Con+, 167, 0,"Acces "
the site loader will show one line
CON+ ACCESS
451 access com cote des neiges
452 access com lac echo
etc.. etc.. no protocol is listed for the other trunks on site 167

It seems to work either way here, but I find it easier to just run one file for both site and site loader. They are the same except for the lead in notes at the top of the files.

 

[dave3825]

When set up like this,

My site loader file
Con+, 171, 0, "Onevoice"
Con+, 171, 2, "Half Hollow Hills"
Con+, 171, 3, "Selden"
Con+, 171, 8, "Plainview"
Con+, 171, 27, "Manorville"

P25,91FE8.26E, 0, "Metropolitan Regional Radio System"
P25,91FE8.26D, 1.001, "Metro25 Simulcast"
P25,91FE8.26E, 21.021, "MRRS Zone 1 Simulcast"
P25,91FE8.26E, 46.046, "MRRS Grand Central Terminal"
P25,91FE8.26E, 47.047, "Moynihan Train Hall"
P25,91FE8.26E, 48.048, "Grand Central Madison"
P25,91FE8.26E, 51.051, "MRRS Zone 2 Simulcast"
P25,91FE8.26E, 81.081, "MRRS Zone 3 Simulcast"
P25,91FE8.26E, 111.111, "MRRS Zone 4 Simulcast"
P25,91FE8.26E, 134.134, "MRRS Corning Tower"
P25,91FE8.26E, 141.141, "MRRS Zone 7 Simulcast"

it displays like this.



I am curious to see a pic of how yours displays. Again, if it works, it works. Just curious.

 

[bigears323]

this is a screen shot

 

[dave3825]

Whats up with the systems prefixed with a semicolon?

 

[bigears323]

They are information description notes for me. The semicolon is not read by the program.
Line 56 is a Con+ listed system as per the RR site, but it comes in here as a NexGen. See line 57. I left the other line with a semicolon not readable.
When I see action, I can remove the semicolon real time and reload real time with line 56 or 57 active, both, or one or the other,
to investigate why it is rec'd as NexGen.

 

[dave3825]

The semicolon is not read by the program.

I knew that. I was playing around with sort in Excel and it cleans up nice. But it did group all the non readable ones together.