Yaesu: SM-5000 Interface Cables for FTDX-5000

[Unidener]

I just got the SM-5000 and FTDX-5000 and I need the 3 cables that come with the SM-5000 (DC Power Cable; V-AF Cable; Mini-DIN Cable).

I could make my own but I would rather have the parts made for these units.

Anyone know where I can find them? I sent an email to DX.

What is the minimum needed for just using the display on the SM-5000 until I get the set of cables? Not against making a "temporary" cable for learning.

Thanks for any help while I learn how to use this beast!

 

[AK9R]

Probably have to contact Yaesu.

 

[KJ4DHF]

You could contact Welcome to HamGadgets - Welcome To HamGadgets By RadioDan W7RF.

 

[Unidener]

Probably have to contact Yaesu.

That's what DX suggested....sent them an email and hopefully I'll get a response Monday....

 

[Unidener]

You could contact Welcome to HamGadgets - Welcome To HamGadgets By RadioDan W7RF.

It appears that some are AV cables and I have all types including DIN cables. I could rig something up but I don't know if there are any specifications that are required. I'll definitely make the serial cable
The cables got lost in a move.............

 

[KJ4DHF]

The hardest 1 to make will be the din cable between the rig an SM. The hardest thing to find will most likely be the dc power cord end as it may be some off the wall style. I had Dan make up my amp standby cable for the FT-847. He has a lot of cable ends so I suggested him for your cable needs.

 

[Unidener]

The hardest 1 to make will be the din cable between the rig an SM. The hardest thing to find will most likely be the dc power cord end as it may be some off the wall style. I had Dan make up my amp standby cable for the FT-847. He has a lot of cable ends so I suggested him for your cable needs.

Thanks again! I'll figure out something while I search!