-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
TKR850 problem
- Thread starter faraway
- Start date
- Status
Moving a TKR-850 10MHz in frequency will need, at a minimum, to have the receive preselectors retuned.
The TKR-850 is tuned to a certain frequency. Moving to a new frequency more than a couple of MHz will require realignment of the receive front end. This will need test equipment to accomplish this.
Although the radio can be programmed with up to 16 channels, it does not have a wide front end in the receive and cannot accept channels with large frequency jumps. If you want to change the frequency from 440 to 460, take it to a Kenwood shop and have it aligned properly.
Although the radio can be programmed with up to 16 channels, it does not have a wide front end in the receive and cannot accept channels with large frequency jumps. If you want to change the frequency from 440 to 460, take it to a Kenwood shop and have it aligned properly.
- Status
Similar threads
- Locked
