• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Trouble Programming :(

Status
Not open for further replies.

highstupid

Member
Banned
Joined
Aug 31, 2009
Messages
256
Location
Wellington County, Ontario
Hi all,
I have an XPR7550 and I am trying to program it via cable, but having no luck. Cable says IMPRES Accessory when connected to the radio, and connects properly to Windows 7, but I cant seem to read or write to the radio.

At a loss, any help appreciated!
 

gtaman

Member
Joined
Oct 23, 2010
Messages
1,039
Location
GALAXY 19 91.0° W
Hi all,
I have an XPR7550 and I am trying to program it via cable, but having no luck. Cable says IMPRES Accessory when connected to the radio, and connects properly to Windows 7, but I cant seem to read or write to the radio.

At a loss, any help appreciated!

Did you install the driver and the appropriate CPS for the radio?
 

dmaria

Member
Joined
May 24, 2010
Messages
295
Hi all,
I have an XPR7550 and I am trying to program it via cable, but having no luck. Cable says IMPRES Accessory when connected to the radio, and connects properly to Windows 7, but I cant seem to read or write to the radio.

At a loss, any help appreciated!

I believe the correct driver is installed with the CPS. I have an XPR7550 that I program using Windows 7 and 10 with no problem. If you haven't installed CPS, you won't be able to program the radio.

Added: The cable contains no USB components. The radio is the USB client - not the cable.
 
Status
Not open for further replies.
Top