Trunk Recorder Configuration File

Status
Not open for further replies.

waterbwuk

Member
Joined
Jul 8, 2010
Messages
84
Hi Everyone,

I am currently streaming my counties system (Asheville P25) to "regular" broadcastify and the calls API using SDRTrunk with two NooElec Smart v4's. I have been trying to get trunk recorder set up (haven't gotten into setting up the config part for streaming yet, just testing the software) and it is somewhat working (as in I know it's picking up the CC and decoding the P25-1), but the audio can be choppy at times and completely unusable to stream. I've tried looking online for some example configuration files and haven't had much luck with what I have found. I was wondering if someone would be willing to share their config file that currently has a working setup similar to what I have?

Thanks!
 

waterbwuk

Member
Joined
Jul 8, 2010
Messages
84
Cancel that, I got it working. Apparently my gain setting was off. Here is my config file now:


JSON:
{
    "sources": [{
        "center": 857625000,
        "rate": 2400000,
        "gain": 327,
        "ppm": 0,
        "lnaGain": 222,
        "digitalRecorders": 3,
        "modulation": "qpsk",
        "driver": "osmosdr",
        "device": "rtl=00000001"
    },{
        "center": 860375000,
        "rate": 2400000,
        "gain": 327,
        "ppm": 0,
        "lnaGain": 222,
        "digitalRecorders": 2,
        "modulation": "qpsk",
        "driver": "osmosdr",
        "device": "rtl=00000002"
    }],
    "systems": [{
        "control_channels": [857987500],
        "type": "p25",
        "shortName": "Asheville",
        "recordUnknown": "true",
        "talkgroupsFile": "/opt/recorder/ashevillep25.csv",
        "callLog": "true",
        "audioArchive": false,
        "uploadScript": "encode_upload.sh"
    }],
    "controlWarnRate": 5,
    "callTimeout": 1,
    "captureDir": "/tmp/capture",
    "frequencyFormat": "mhz",
    "defaultMode": "digital"
}
 

jasonk

Member
Feed Provider
Joined
Dec 19, 2002
Messages
300
Location
Dayton, OH
It looks like you need 3 dongles to properly cover that system. While you can technically fit all of the frequencies into your current setup - you end up with problems on the edge of the range. Just a note from my experiences.
 
Status
Not open for further replies.
Top