TuWay Communications

[sibbley]

I need a little help from the Lehigh Valley folks. I've been working on TuWay Communication Net 181/Site 1, Allentown.

I've come up with what seems to be an impossible LCN. I have as follows:

453.0125 CC, LCN 1
451.8875 LCN 2
451.9875 LCN 3
451.9125 LCN 0

That's right 0. Now I did initially find this using LCN Finder on the 536HP. Since the LCN's seem to default to 0 if you don't input an LCN, I changed all of the 0's to 1. Re ran LCN Finder and hit 4 found of the 6 again. Checked 451.9125 and low and behold it was again 0. Reset to 1 and ran LCN Finder for a third time. Again, same frequency back to 0.

I've been running BCD Log View all morning and I'm still getting 0 for 451.9125. I am by no means an expert on TRBO or DMR. Is this even possible? Does this mean that the way the scanner determines LCN still needs work? Is it BCD? I've attached a screen shot of BCD to show what I am seeing.

I'm pretty sure 451.9125 belongs to this site. Scanning conventionally I get Net181/Site 1. Could one of you in the valley have a look with a scanner and DSD+ to help confirm or deny this LCN 0 existence?

Thanks,

Tony

 

[W2SJW]

Anyone that has DSD+ in the area, please park DSD & FMP-CC on the control channel at let us know how many logical slot assignments show up after about 30 minutes of monitoring. If it shows 8, than this new channel he found IS part of the site. If all you get is 6, then the rabbit hole goes way deeper...

Sent from my Galaxy S6 via Tapatalk 5

 

[sibbley]

I've had DSD+ sitting on the control channel for an hour and a half, only get 6. Chalk it up to something else going on I guess. I'll let it parked over night.

I'm continuing to work on this system. There is at least one more site in Tannersville. I'll post here what I can find. I did get a quick hit today on Site 1 TGID 666.

 

[10-10]

I'll have to scan that CC when I get back into town this weekend.


Sent from my iPad using Tapatalk

 

[sibbley]

I'll have to scan that CC when I get back into town this weekend.


Sent from my iPad using Tapatalk

Thanks, It'll be good to have another confirmation.

 

[sibbley]

Must have been the 536HP giving me the 0's on that frequency. 3 LCN Finder runs with the new RC4, and I'm not getting the 0 anymore. It must have been something with RC3? Even tried the LCN Monitor in BCD, no more 0 there either.