To anyone looking to acquire commercial radio programming software:

Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

To obtain Motorola software see the Sticky in the Motorola forum.

The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Tytera USB Driver Help for MD-UV390 GPS

Thread starter Unidener
Start date Dec 29, 2024

Unidener

Member

Dec 29, 2024

Just got my New TYT usb cable (looks exactly the same as the one that came with the 390) and this one is seen by my computer.

Device Manager listed the new device. After deleting the driver then it showed up as STM Device in DFU Mode and I can now read with CPS the codeplug.

I installed OpenGD77 and let it install the USB drivers yet STILL there is no com port so OpenGD77 cannot backup calibration or anything even after trying to put it in DFU mode.....it still wants a COM port.

I've also tried to install the drivers from TYT for USB.

Also NO Errors in Event viewer regarding the installation

Suggestions on Driver installation and magic process or installation method???

You must log in or register to reply here.