WyoLink in SW WY?

[kf7yn]

Greetings neighbors. I recently took a trip to Flaming Gorge via Evanston and Mountain View. I heard absolutely nothing on the WyoLink system. I programmed my PSR-500 with the custom trunk table listed but also read that no custom table is needed with the PSR-500, Pro-106, etc. Which is corrrect?

Is WyoLink active in SW Wyoming?

Thanks

 

[WyoWabbit]

The table listed is for the PRO-96/2096 ONLY. Set your scanner to P25 AUTO. This way the tables needed will be read from the control channel data. - Tom

 

[Junior1970]

Has WHP migrated to WyoLink? If so in Uinta County are the only two sites (Church Buttes and First Divide) the proper ones.

Also; Has the SO and Evanston migrated yet?

Good question Jon on this as I am trying to figure this whole WyoLink thing out myself.

Thanks.

 

[kf7yn]

The trunking table I'm refering to is the lengthy table below that listed for the Pro-96/2096, but thanks for the tip to set the scanner to P25 AUTO and ignore the custom tables.

Now the question remains, is WHP on WyoLink in Uinta and Sweetwater Counties?

Thanks

The table listed is for the PRO-96/2096 ONLY. Set your scanner to P25 AUTO. This way the tables needed will be read from the control channel data. - Tom

 

[3mary2]

Psr 500

Has WHP migrated to WyoLink? If so in Uinta County are the only two sites (Church Buttes and First Divide) the proper ones.

Also; Has the SO and Evanston migrated yet?

Good question Jon on this as I am trying to figure this whole WyoLink thing out myself.

Thanks.

I recently ( a week ago) monitored I-80 from Utah to Rock Springs and then on into Worland Wyo. I programmed all the control channels from Evanston area to Worland and set my PSR500 to P25 Auto as mentioned above and the scanner formed it's own trunking table. The WHP is listed as being on the Wyo-Link. Infact not long ago it was postedthey were going to the system. The system is still expanding but I know Sweetwater Sheriff's Office and WHP is up and running. I also think Fremont County Sheriff is on the system. If everyone comes up on the system like your neighbors in Utah (UCAN) I think the scanner hobbist will really have the enjoyment of hearing alot.

 

[WyoWabbit]

I know it is confusing. I submitted the long table which has the complete table info. The shorter tables should have thus been eliminated. I have monitored WHP on TG 6382 for Evanston and Rock Springs. -Tom

 

[kf7yn]

Thanks for the info Tom.

 

[3mary2]

Greetings neighbors. I recently took a trip to Flaming Gorge via Evanston and Mountain View. I heard absolutely nothing on the WyoLink system. I programmed my PSR-500 with the custom trunk table listed but also read that no custom table is needed with the PSR-500, Pro-106, etc. Which is corrrect?

Is WyoLink active in SW Wyoming?

Thanks

If you would send me your email address I will send you a copy of my file. I drove from Evanston to Worland and back. WyWabbit and Junior this message is also for you guys if need be

 

[whp3310]

RE: Wyolink in SW

Currently in Evanston Right now, WHP Patrol is on wyolink, PD, SO, Fire, all still on their conventional setups, No news to when they will be migratiing over to wyolink.

 

[kf7yn]

Thanks much for the update.