• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Zetron Model 735

Sputnik1

Member
Joined
Jun 16, 2009
Messages
45
Location
Kettering - Northants - UK
Hello everyone.....

not sure if i should be posting this elsewhere but I'm hoping that some M'rola fans may be able to guide me......

i have an issue with a Zetron 735 teleconnect

can anyone guide me into how the contact lists embedded in the unit can be edited ?

any guidance would be gratefully appreciated and acknowledged

thanks in advance

Sputnik
 

ramal121

Lots and lots of watts
Premium Subscriber
Joined
Dec 5, 2008
Messages
2,105
Location
Calif Whine Country
Like a lot of Zetron products you can connect a PC and access via RS-232 to the internal menu system using PuTTY, Hyperterminal, etc.
Do you have the manual?
 

Sputnik1

Member
Joined
Jun 16, 2009
Messages
45
Location
Kettering - Northants - UK
Hello

thanks for reply

client has PuTTY available on site but no manual

attached screen shot sent through

Teleconnect works absolutely perfectly until you try to access mobile ID numbers higher than 55
the 735 standard has a 99 user id capacity so i am assuming that the unit only included ids 01 thru 55
when originally programmed

now its time to add extra users but where to add the magic numbers without wiping / out corrupting existing settings

5T - CCIR

any guidance appreciated

regds

M
 

Attachments

  • IMG_4360.jpg
    IMG_4360.jpg
    214.3 KB · Views: 19
Top