700 mhz

  1. P

    Looking for radios for my department, help?

    good day, I am currently working as a CPO in Alberta, the department im working with is brand new and we are essentially replacing a security company that operates on UHF to talk to their officers and other staff within the organization. This is the challenge I am facing, some staff cannot...
  2. johnnyelectron

    396XT replaced by 396T issues

    Yeah, I know, I moved backwards. The 396XT worked without issues until it disappeared. Bought a 396T, thinking it would be a breeze to program with the control channels=WRONG. No dice. No audio. I can only assume it's because the 396T was 'born' before the XT? Can the 396T do 700MHz and do I...
  3. Josh

    BCD396XT programming 700Mhz MPSCS info

    I have a Uniden BCD396XT, I bought it when the radio shack stores were all closing a few years back and I've used it to monitor the MSP on and off. Well, the new Pontiac site is up and running and that one is nearest to me but my radio isn't tracking it properly because I do not have the proper...
  4. B

    bucks county police direct 1

    i have been monitoring bucks with A GRECOM PSR800 scanner for a while which has since been sold but before then i know there was a conventional frequency the police were using. i believe the channel was called "Police Direct 1'' would anyone know what frequency it is
  5. Joseph11

    Custom Modified 700 MHz Scanner Antenna

    As a random project, I decided to modify a cheap/unused 144/430 MHz Nagoya NA-771 antenna I had lying around to work best on 700 MHz. I cut the element down to about 7.27" to perform ideally on 772 MHz (middle of the 700 MHz repeater output range) as per KD4SAI's Antenna Calculator. Question is...
  6. nated1992

    Buncombe Co. 700Mhz and Pro 652

    Have a pro 652 and have put the information in for the buncombe county 700 MHZ with a antenna which is 25-1300mhz " so the packaging says " around 19Ft up with around a 45 to 65 run of Commercial grade coax "Stuff the Cable company uses for house drops ". i have been playing with it for about a...
  7. scanthewaves

    Benton County Public Safety?

    I just moved to Corvallis and have been monitoring analog 155.4900 Benton Law last day or so, not really sure what I'm listening to, is this dispatch for CPD and LCSO? Is this the simulcast for the 700 MHz trunk? I'm perplexed if there are only 3 channels for Benton simulcast 700 and 2 are...
  8. W

    Has CHP in South Bay moved vehicle extenders to 700 MHz?

    I normally monitor the California Highway Patrol vehicular extenders (154.905 MHz) when I'm on the road, and yesterday I realized that it's been weeks since I've heard anything. Normally I hear something at least once during my commute. Has the Golden Gate division moved over to 700 MHz for...
  9. N

    chp 700 mhz monitoring

    hello,i have a RS pro106 scanner and am trying to figure out the way to monitor chp valley div,im near davis ca,outside RS multi antanea mounted about 35' up,clear LOS,help
  10. K

    Tuned UHF Antenna

    Hey guys! I'm looking for a BNC antenna tuned to both the UHF-T (450-512) and 700/800 MHz bands for base station mounting. A simple whip is fine; not looking for anything bulky, like a log-periodic, Yagi, or a discone. Thanks!
  11. Mojaveflyer

    CHP 700 MHz Base Station Frequencies

    I see in the data base a list of 700 MHz base channel frequencies. Will these be trunked or conventional 700 MHz repeaters? Also, I seem to recall these would only be used in metropolitan areas with hi-VHF frequencies in the out lying areas... Is that still the plan?
  12. W

    700 MHz System in OKC Area?

    I was wondering if someone could help me verify that there is a 700 MHz system in operation in the OKC area. I am picking up a lot of traffic between the 790 through 795 MHz range. At times I am picking up voice communications between 775 through 779 MHz range. A possible control channel is...
  13. K0JAD

    Surprise PD?

    I know they have gone to the 700 mhz band but I wonder if any kind soul who has the capability would consider streaming it so a nosy old retired guy who lacks the $ to purchase a 700 mhz scanner can keep up with our town?
  14. T

    Can you reflash?

    I am currently looking into buying some Motorola XTS2500 model 3 radios for my fire dept. Our dispatch is set up on the 800 MHZ frequency, but have found some radios that are 7/800 mhz capable, but have been previously flashed for the 700 mhz frequency, Can these radios be reflashed for the...
  15. A

    700 and 800 MHz

    Does anyone have any recommendations for a mobile mount scanner antenna for listening to the 700 and 800 MHz that are being used on the LWIN.
  16. mtindor

    MARCS-IP ("New MARCS") Site and Talkgroup Discussion

    A new 700 Mhz license application is pending for Ohio MARCS - Cuyahoga Co Project 700 Mhz 5 sites Simulcast Click HERE to view the pending application Click HERE for a Google Map of the sites LOCATIONS Cleveland, OH (CUYAHOGA) Warrensville Hts, OH (CUYAHOGA) Mayfield, OH (CUYAHOGA)...
  17. R

    Boise Fire Says No to 700 MHz Digital Radios

    Ada County Idaho was one of the first jurisdictions in the United States to embark on a cutting edge 700 MHz digital trunked radio project. The City of Boise is in Ada County and agreed to participate in the countywide radio system. The Boise Fire Department purchased more than one million...
  18. wa8pyr

    Raytheon to deploy P25 system in eastern Idaho

    New 700 MHz system for Freemont, Madison, Jefferson, Bonneville and Clark counties will also allow crosspatching to existing VHF and UHF radio systems: http://urgentcomm.com/networks_and_systems/news/raytheon-p25-system-deployment-1016/