display

Does the XTS 5000 have a diagnostic/service mode whereby it will display received signal strength in dBm? If so, how do you put the radio in that mode of operation (e.g., press the x button 5 times after power on, etc.)? Thanks!

When using 3-Line Display mode it shows a bigger don't in the pic I've attached... However when you enable Display Unit ID's & 3-line mode the display text on the bottom gets smaller due to the TalkGroup ID# & Service Type. Is there any way to get rid of the TalkGroup ID & Service Type so the...

I have a plain old Uniden BC355N scanner in my truck, but it has recently started displaying erroneous characters on the screen. Example attached. It appears to operate fine otherwise. Has anyone ever seen this on a BC355N (or any other Uniden scanner)? I suppose I'll be calling up their...

Hi, I bought a replacement glass for my broken display glass window on a Yaesu VX7R, including the double sided tape. When trying to remove the old glass with the crack, I found it is very tightly stuck with the old tape. (Of course I removed the plastic cover with the screws first). I can...

no matteer how i set my backlight i cant get it to come back on. Anyb.ody know anything about this? thanks for any and all help. It is a uniden bc396 T........trunktracker iv

I programmed a bunch of frequencies in via ARC XT scanner software. For Nashua it displays it on the bottom near SO and GRP but the other frequencies it doesn’t show it. I have it labeled to what I’m listening to IE Lowell Fire.

I just picked up a Pro-2021 and I noticed the display isn't lit up. I have a second one that I've had for years and the display works great. Is there a way to fix this with lights or do I have to change the display? If anyone has experience with this scanner let me know. THX in advance.

I was curious if the Admins and Lindsay would like a sticky for people to list what suggestions they would like to see on the feed platform? Something for the back burner from me, is possibly displaying the feed "average listener" count in the Top 50 section. I'm not sure if that would use up...

Looking to have the multicolored display stay illuminated (in any color) once the unit is turned on and plugged in. Seems very hard to read without backlight. Can this be set at startup? Is the only way to illuminate by pressing a key? Can one set the unit so that when a frequeny triggers...

Hello there! I've had this software since I have had my scanner(Pro-106). The software is great and at one time worked flawlessly. However, today I hooked everything up to my PC and and everything works EXCEPT the display on my computer for Virtual Control. Normally it would mimic the display...

Hello, for anybody that works with the Kenwood TK series radio`s i have one that im trying to figure out if its just a display problem or internal firmware update ... the screen use to display just a bunch of the icons that can be enabled (Scrambler, priority, msg, etc) now it just stays blank...

Does any outfit perform backlight LCD upgrades for the venerable PRO-92? Even when mine was brand spanking new in 1999, the backlight was a weak, sickly green, like you might receive from an anemic firefly <g>. My biggest gripe with this terrific scanner has always been the weak and...

I have a PRO-96 and had the display go "all black" 2 years ago. It was sent in for repair while still under warranty (at that time) and has been working fine until... Over the weekend the display went "all white," and I discovered this ribbon connector issue and proceeded to perform the repair...

This morning my PRO-197 showed every character on the display mirrored. The words still read from left to right, but each character or number was mirrored. At first I thought I was still asleep, rubbed my eyes, but the characters were still mirrored. WEIRD! I took some photos for posterity to...

I have an AR3000A Scanner. If it has been disconnected from all power for a fair while upon turning on it will not start in an ordered fashion. All the display characters are on and the scanner is 'hung'. I replaced the 3V batt which was dead but to no avail. My understanding is that before...

I have the Pro-96 and using Demo of Arc96 currently, what do I need to do to get it to show the Alpha Tag when it stops on an active channel? There is a Alpha Tag associated with every entry. Currently it show something like this...... H400........+DG VC 866.96250 Trunk CC MOT: 07022 Version...