dpl

I found this in another forum: DPL = Digital Private Line. It's like PL tones, but it's a digital code that is sent instead of the sub-audible tone. It's just another option. 071 is the digital code that is used. It doesn't mean the audio signal is digital, just that the squelch code is a...

First off, I'm completely new to radios. I have a Baofeng uv-9g GMRS radio. I have tested it via NOAA to confirm its work. I want to use it to monitor my local municipality radio frequencies near me. I'm trying to program my radio through CHIRP. the freq. in question uses DPL 026 for tone...

I'm having trouble programming my MCS2000 for repeaters and could use some assistance. I have successfully programmed specific channels with no PL tones, and can transmit and receive clearly. However, when I try programming PL tones, I cannot hit the repeater, and cannot hear traffic from the...

Hello! I am new to the radio community and am looking for some help. I just purchased a Baofeng UV-5R radio and had some questions about how to listen to some channels. I live in the Bentonville, Arkansas area, so any frequencies I refer to can be found on the website here. After playing with...

I'm an older callsign (KJ6FQD) that hasn't been active for a few years. I have some questions regarding digital to analog TX/RX.... PLEASE.... Any info, wisdom, or commentary is welcome and much appreciated. THANK YOU in advance. QUESTION 1: Can an 2M analog HH radio receive and transmit on a...

Hi there, What’s the difference between PL and DPL? Cheers, Dean

I'm sorry if this has been posted about already but I have had no luck finding it in the search criteria for this particular radio and this issue. To start off, I am posting on behalf of my company, a security company, and we are trying to program our Motorola XPR 7550 radios to work with a...

I have the 110w model 2 mcs2000. I programmed dpl 047. Come to find out it is transmitting dpl 023. Can anyone help me?

I want to be able to access a 365 DPL tone with FMN mode. What would be the cheapest scanner capable of picking this up? I really want to get into scanning but don't want to spend a ton of money. Thanks for the help!

What is the easiest/quickest way to search for the proper PL / DPL Tone needed to open the repeaters receiver? In other words how can I quickly search for the proper Tone that I need to transmit in order to operate or use the repeater? Obviously if the repeater is using the same TX/RX Tone it...

So i need a little help here. At work we use motorola ht750's, cp200's, and xpr6100's (digital) we have a repeater with a input of 469.0250 and output of 464.0250 standard 5+ offset. I dont know the PL tone but i found the DPL is 723. I can hear all radio traffic on the output with the DPL...

Hey Everyone! I'm sure it's a very silly question, but I can't figure out if I need an digital scanner or not. Here is the page for the are I live in Craig County, Virginia (VA) Scanner Frequencies and Radio Frequency Reference I am looking at the Law Dispatch and wasn't sure since it was DPL...

Quick question, is I know PL is on analog (non-digital) systems, but just wondering about DPL, can I get DPL on an analog (non-digital) system? The BC346XT to be exact? Thank you!

Sorry i'm sorta a newbie! Quick question I am trying to program my radio to 114 DPL but the options I have are 114 DPLN and 114 DPLI It would be the one with the N, correct because it is not inverted? Also say a radio is at 460.00 114 DPL and I have a radio at 460.00 no DPL would I be able to...

I'm curious as what the DPL would be for the a second frequency. My school has given me to permission to transmit on their frequency when I help out at sporting events. If you look here at Benton County School Corporation it has 1 frequency, 155.265 with a 754 DPL Benton County, Indiana (IN)...

I'm curious as what the DPL would be for the a second frequency. My school has given me to permission to transmit on their frequency when I help out at sporting events. If you look here at Benton County School Corporation it has 1 frequency, 155.265 with a 754 DPL Benton County, Indiana (IN)...

how can i tell if a frequency on radio reference is digital? if it has a digital PL does that mean i need a digital scanner to pick up the signal?

Sorry if this has been discussed before, but I can’t find anything. My XTS5000 will unmute for “interference” from something electronic when using a DPL. If I put the XTS5000 next to the HT1250 both monitoring the same frequency and dpl, the XTS5000 unmutes and you hear the static. The HT1250...

How can I get rid of squelch tails when monitoring? I have DPL tones in and this helped on two channels.. But all other channels still have it.. I can put my scanner (BC346XT) right next to a Fire Dept. radio.. The radio will not have a tail, but the scanner will.. How can I change the scanner...