dsd+

I'm attempting to use Unitrunker-1.0.32.7 and DSD+ 1.101 to monitor the "ARMER" P25 system in Minnesota. (I'm already using a Uniden BCD396T to monitor the same system.) I'm using a laptop running Win 10 64 bit with 8 GB ram. I have Unitrunker working with a single RTL SDR stick configured for...

A newbie could really use some advice from a wiser forum member here. Apologies if this post is miscategorized. I believe this is a decoding issue, but the root cause actually may be a misconfiguration in Unitruker. Getting noise, and faint voice in the background. I got it to work once but...

I have a 820T2 dongle connected with HDSDR on an HP laptop. I used ZADIG 2.2 drivers and then installed DSD+. The input is Cable A and the output is Speakers. When the radio comes up everything looks great. I tried 2M because I have a FT-60 and when I transmit Simplex it shows up on the sound...

Hi there, TLDR; I have a HackRF and want to decode P25 and trunk track like a hardware scanner - what are my setup options vis a vis OS X , Windows or Linux New to the forum here so please be gentle : ) So I got a HackRF One at Christmas as I've loved fooling about with SDR dongles for ADSB...

From the public release version of DSD+, there is a decoder named 'XPT'. I have been playing around with this for a while now and I havent really seen much change into it's functionality. What I would like to see is what Capacity Plus also provides which is Linked or single Sites. Can this be...

DSD+ Fast Lane v2.32: Several critical bugs have been fixed Decoding of additional NEXEDGE AVL messages has been added

I've observed the following with the latest FastLane FMP24 v2.8 dated 2016-05-16, using a NooElec 0.5PPM R820T SDR and the command-line: FMP24 -i2 -o20001 -P0.5 -g36.4 -b12.5 -f772.00625 -v10 -a1 -t1 -rc The -b option doesn't seem to work. 1. If I specify -b9.5 or -b12.5, it recognizes the...

Greetings all, My university uses an unencrypted MOTOTRBO Capacity Plus radio system that I am trying to monitor/scan using a spare Windows 7 computer with a RTL-SDR unit, SDR#, and DSD+. As far as I can tell, my university's radio system has four frequencies across two channels (Channel 1: Rx...

FANTASTIC! I can't wait to see if it follows my NXDN control channel when it changes at midnight. I also now have a 3 dongle setup monitoring both a P25 and NXDN system with a shared VC. Three copies of FMP24 and 3 copies of DSD+. Now if I can only figure out how to arrange the screen! ---...

Im currently using: DSDplus 2.8 FMP24 2.4 I cannot get DSD and FMP24 to establish a tcp link when trying to tune to a control channel. On the dsd CC side I get the error "TCP link version error" while on fmp24 CC i get "TCP error = 10053" I have attached a screenshot of the problem. Imgur...

Hi all, I have a successfully configured DSD+ install using a RTL2832u + R820T SDR stick. All other systems decode successfully when I have a strong enough signal, but not this one. The problem is not with noise, as the signal is way above the floor. Based on my experience, it sounds like a...

I'm fairly comfortable with Unitrunker and DSD+, and I've used the programs successfully for a number of systems. However, I can't achieve greater than a 67% decode rate for one of the local P25 Systems (https://www.radioreference.com/apps/db/?sid=8227). The system is a 5 or 6 tower simulcast...

Problem 1 when using FMP was: freq data files not found I corrected file path Now it is Hung up on: Loading Freq Files... Anybody else had this issue?

Hello I have dsd Plus installed i use a gre psr-500 with a tap on tp-4 when i start up dsd it decodes nxdn for 30 seconds then quits it will never decode dmr or p25 i have tride it on an xp laptop and on a dell laptop one with a sigmatel audio cand and the other with an hd audio card what could...

DSD+ 1.112 New Features ----------------------- DSD+: Added per-call recording to MP3 files; use -Pmp3 on the DSD+ command line DSD+: Added detection and audio synthesis of MotoTRBO Dual Capacity Direct Mode (DCDM) signals You can use the -1 and -2 command line options and the...

When I click on the "Start DSD" button in DSD+ I am getting the following error message. "Error - The system cannot find the file specified" Any idea what this may be since it doesn't say what file? I have installed the DSD, DSDPlus1p101, and DSDPlsuDLLs and the FMPA1p02 (since I'm using an...

DSDPlus 1.101 is now available to everyone. ihttp://www.dsdplus.com/

(1.) On DSD+ make the Voice Start Alert enable a command line option. (2.) Make an option on the FMP scanner such that it will stop on control channel data. The voice detection stop is nice but there needs to be a way to make it stop scanning on any signal. --- The reason for suggestion #2: I...

This is my first time doing this. There is a local hospital that uses a DMR repeater & I would like to find the group codes used. I'm currently using a PRO-668 scanner with the discriminator output. I am getting the sound a radio makes when it is keyed up but no voice. I am getting a bunch of...

Has anyone received any updates threw this option? Not asking anyone to share links, just if You are getting updates.