ht1250

My 1250 wont let me field program my scan list. It has it in the menu. And even let's me choose channels to add. But,when i scan. It doesnt pick up the channels i selected. Instead it scans channels all through the radio

I had a friend ask me to program his HT1250-LS the other day. I have programmed many of these radios in the past so I knew what I was doing. I filled out 16 channels to mirror the local FD's radios and verified no errors in the error log before saving the codeplug and programming. When I...

More specifically i`m reaching out to ask for some knowledge on some of the deeper aspects of CPS. I understand the program on the surface but would really like to know what it can do! I really haven't been able to find much information on it so If anyone is willing to hop on a teamviewer...

Apologies if this has been addressed elsewhere, but a cursory search didn't turn anything up. Looks like the maximum number of systems per signaling type is four on the HT1250's. As the title states, wondering if there's any way to increase this limit? Particularly interested in adding several...

I am aware of the repeaters turn off code, pl settings, and lower end motorola repeaters. This issue is common when newer radios equipped with a active key loaded ucm or mace key transmitting in analog clear using post mdc data will emit a nasty burst if mdc is not muted and in any case muted...

Hello, I have an issue when programming my radios for the departments I am with, So I have a HT1250 UHF radio and I have programmed 2 zones in it, one for my volunteer dept. and one for my job. I have 2 different unit numbers and I am trying to program the radio to where depending on what zone...

I'm about ready to program an HT1250 that I recently bought, however I'd like to clarify one thing before I start. I bought the radio and the seller sent me a printout with the most current radio information that he had indicating the firmware version, original/latest codeplug version...

I am new to programming Motorola products, and I have a HT1250 that I have been attempting to program for a while with no success. I bought the CPS software (version R06.12.09), and installed it on my computer. I am running Windows 10 on my computer, and have tried both with, and without...

I have program software for CPS R06.09.06 and i am trying to read my radio and it says error 4-1379 invalid region code and wondering what i need to do to fix it and be able to program the radio

Is it possible to program an HT1250 with a recording option board to record Transmission(s) automatically after a Quick Call II System has been received, instead of having to manually hold down a pre programmed record button. Thanks for the help in advance !

I have searched and searched and cannot find the answer to this.... The other night I bumped something on my radio while sitting on my squad. Now, whenever someone else transmits, my radio beeps first. I'm guessing it is designed to grab attention that someone is about to talk, but it is...

I was having quite a few difficulties using the Motorola supplied RIB box communicating through a serial USB adapter. I've had success with this set up once... just once. I confirmed the proper Port was being used. I also changed the port both through the computer and the CPS to ensure there...

I have a HT1250 (UHF) and an HT1250 LS+ (VHF). My Professional Radio CPS (RO06-12-08) reads and writes to the UHF without issue, but will only read the VHF unit. Any ideas on what the issue might be and a solution. Note: I have a friend with the same software and he is able to read and write...

i need some assistance with programming i have a ht1250 vhf i have cps ver R06.09.06 and my radio is ver R05.08.03 when i try to read the radio with the R06.09.06 it gives me a message Error 4-1379 invalid regional code for this cps version any ideas on what i can do to be able to program this...

I may be able to buy a UHF Motorola HT1250-LS and I have access to the programming CPS system to program it. I have tried to program a HT1250-LS for ham frequencies and the best I could do was get the receive to work. I took the radio out of trunking mode, and I set the tones needed for the...

Hey all, First off, I currently have a Motorola HT1250LS+ that is fully functionable with TX'ing and communication with Motorola CPS. The current version of my CPS is R06.04.00. Now i have a second portable, the same exact one. Though this one was pre-programmed as i got it from a online group...

Hi to all of you! I have 2x HT1250 radios and despite all the efforts I cannot program them to: 1. call eachother when I pres a call-designated button (so not at the beginning or the end of PTT, it is anoying to do that all the time) 2. have an ID listed on the screen when the call is received...

I have two HT1250 portables, one UHF and one VHF. I am having continuous issues where with normal movement while on my belt, the radio likes to shut itself off and back on like the battery is loose. Everything I've checked looks good as far as the battery staying connected to the radio. Radio...

Hello all, I have a Motorola HT1250 and the housing kit is pretty beat up, and I ordered a new one. I have been searching the web a bit, but cannot really find anything that can help me out, so I came here. Is there anyone out there who can give me good instructions on how to replace the...

Hello all, So I have the version on Moto CPS for the HT1250/750. It also works for my EX600 XLS. I just spent 4 hours entering all the frequencies into the conventional personality (channel information) for my 1250. I want to use the same conventional personality for my EX600 XLS, but I...