xtl

Keyloading an Astro Spectra using the Kfd tool shield. I am attempting to build a connector for the w series control head mic port. Does anybody know what the sense, ground, and signal on the Kfd tool shield should go to on the w series control head mic port?

So recently I’ve been wanting to install a UCM into my XTL2500 but I haven’t been able to find any information on where the UCM needs to go in the radio. Any information on this would be greatly appreciated.

any XTS/XTL CPS experts that may have any ideas on why a codeplug that has one talkgroup which uses the same ADP key as everything else in the radio - and when using NAS the radio will stop on that talkgroup and display the ID of the transmitting radio, but not decrypt the one talkgroup. all...

Hi all, I have an XTL2500 with the standard M5 head on it. I have made it to an O5 by flipping the tab around but the flex cable does not match up to fit my APXs connector. Can anyone point me in the right direction for the adapter to get the M5 connectors to work with my APX 7500 connections if...

Hello, I am attempting to program a scan list directly on my XTL 5000 and It will not let me remove or add channels. and the scan list program softkey will not show on the display. I have been using the ABC switch to put it in program mode.

Fellow techies, I ran into a situation, not that long ago, where I couldn't read or program an XTL mobile through anything but the rear accessory connector. After getting thoroughly disgusted with not finding the HKN6160's pinout on the Internetzz, I finally broke down and bought one. I...

I am trying to help a small fire department with programming their XTL radios. The guy that programmed the radios before put an ASK write protect on all their radios. He has since got of the business. I have ASK for both systems in the radio and I can program them but they are asking if I can...

Hey y’all, Got a quick question that’s boggling my mind. I have an XTL-5000 and every time I power it on manually the screen displays a readout saying “PWROFF NODELAY” for a second and then boots up normally. I’ve tried googling and have gotten nowhere. Can someone tell me what “PWROFF...

I recently purchased a headless XTL 5000 high power. I changed the control head from an 05 to a W3 HHCH. The W3 will allow me to change the channel and volume. When I key up the radio it will transmit the MDC info but the microphone doesn't seem to pick up any sound. I have searched the forums...

I have an XTL5000 800MHz that is headless. There are two db25 pin connectors on my radio. Is the XTL5000 capable of working with the W3 head? Has anyone had any success in making this work?

I have programmed an XTL5000 that has a tone after the normal MDC1200 keyup (wait to talk) tone. This tone is just a short beep but it's not the short side tone beep because it does it both on MCD and ASTRO channels. It's approx 500ms into the key up. The system we are using is Analog...

I'm new to the forum, I've looked until my eyes went blurry, the problem i'm having is a stupid one. I have a XTL 2500 and when i hook up my dtmf mic everything works fine except the dtmf buttons 1, 2,and 3 all seem to do a home revert, they take me to zone one channel 5, (in my radios thats...

I work for a small government agency and we use a XTL 2500 converted to a base station to dispatch units in the field. We are wanting to add a foot pedal configuration somehow, to allow hands-free operation at our dispatch console. I am not finding anything very easily online.... Has anyone on...

I just finished installing a XTL 5000 in a 2005 Ford F-150 in the dash mount configuration. Everything installed fine and it was up and running, well while i was doing some programming in the CPS i accidentally switched the Ignition Switch setting from Soft Power Off to Required and now my radio...

I've been tasked with making a small change to the numbering of channels, and some PL tones in our 15 VHF Vehicle Mounted Radios. System is conventional. I have successfully read, edited and sent the edited codeplug to one of the radios. I desire the same same channel list to be in each...

Seems as if I have had so many issues over the last 6 months with this mobile. I have recently put through some company changes to the programming but most of all I have feature and function problems. The radio shop I use isn't too used to programing the newer motorola mobiles. I have Quick Call...

Hello, I want to start by saying I am here to grab others knowledge to assist me in things so main thing to remember is I am not as knowledgeable as some on here. I have a VHF XTL-5000 in my personal vehicle that I use for (Local Fire/State SAR/Private Company) the tech that has programmed my...

I was issued a new computer with Windows7 -64bit. I have XTL 2500's and XTS 2500's, The CPS software installs however the device will not load drivers. .... is it possible, has anyone found a 'way' for the device to load.?