It took me a long time to find out how to reset my BCD396XT scanner to it's original factory state. I found a thread for another Uniden scanner and tried what it said he does for his scanner and it worked. So I thought I would post it here under the proper name
It takes four hands to complete this. LOL just kidding
1. Turn off your scanner
2. Hold down the following keys at the same time.
2, 9, and hold
3. While holding down those three buttons, power the unit on
That is all there is to it. You will have to press the Yes key afterwards, but you will be able to see that in the window when it asks you. After you hit the yes key, it will take a minute at least to reset itself.
Good luck
It takes four hands to complete this. LOL just kidding
1. Turn off your scanner
2. Hold down the following keys at the same time.
2, 9, and hold
3. While holding down those three buttons, power the unit on
That is all there is to it. You will have to press the Yes key afterwards, but you will be able to see that in the window when it asks you. After you hit the yes key, it will take a minute at least to reset itself.
Good luck