BCD325P2/BCD996P2: BCD996P2 to RH96 Converter

[MDHathcock]

I ended up having to use the ATmega328P (Old Bootloader). But it says that the "uploading is complete". Technology has run off and left me.

 

[lebrunmn]

I ended up having to use the ATmega328P (Old Bootloader). But it says that the "uploading is complete".

Let me check my box o’ parts and notes from that project… as I recall the Old Bootloader selection didn’t work for me. I’m on the road until Saturday, but will check when I get home.

 

[lebrunmn]

I ended up having to use the ATmega328P (Old Bootloader). But it says that the "uploading is complete".

Going over my notes, and reviewing the thread... did your nano board have a reset button on it? On my nano it was just behind the usb port, on the board. One person on the thread mentions that the converter didn't work until he pressed the button, then it began working. It's worth a shot!

 

[Firebuff66]

I built 2 of them 3+ years ago and they work great, I have tried to build another and the board shows its taking the program but it never works. tried the reset button, tried every version of the software and new and old bootloader with no luck, tried 4 different computers from win XP to Win 11 and i just cant get the board to work

 

[lebrunmn]

Jon-
My experience is the same... I was able to finally program the nano by reverting to Arduino v. 1.8.16 instead of using the latest version, but could not replicate that experience today, when I pulled the project box from my basement. These are twitchy little things!

 

[MDHathcock]

I'm not sure. I have the patience of an old man. I abandoned the project. It was too finicky. Hopefully the RH200 will be released soon.