Cant get Lancaster Texas

Status
Not open for further replies.

bravo14

Member
Premium Subscriber
Joined
Feb 18, 2005
Messages
5,448
Reaction score
679
Location
Polk County FL
Unless they changed CH ID around or RAN settings. Might want to get all active freqs and do a RAN search than Analyze finder.
 

u2brent

OAMPT
Premium Subscriber
Joined
Jul 17, 2010
Messages
3,346
Reaction score
1,308
Location
KRWDPAXKRS1
Cedar Hill isn't inside the range defined by the circle..:unsure: maybe encrypted...
 

Whiskey3JMC

Quiet numbskulls I'm broadcasting!
Premium Subscriber
Joined
Jul 16, 2006
Messages
10,134
Reaction score
8,844
Location
Simulcastylvania, TE
22 minutes and about 17 miles away, the OP should be able to get some sort of a pick up if the site is indeed putting out 100 watts output. But other factors like topography and obstructions could hinder that, especially if an external antenna isn't used. I'd suggest the OP to click the report link and ask to relocate this thread to the Texas discussion forum for more local feedback. OP can also post their Sentinel hpe export as an attachment to be checked by someone local to them to rule out a programming error
 

fastgone

Member
Joined
Oct 13, 2010
Messages
45
Reaction score
2
22 minutes and about 17 miles away, the OP should be able to get some sort of a pick up if the site is indeed putting out 100 watts output. But other factors like topography and obstructions could hinder that, especially if an external antenna isn't used. I'd suggest the OP to click the report link and ask to relocate this thread to the Texas discussion forum for more local feedback. OP can also post their Sentinel hpe export as an attachment to be checked by someone local to them to rule out a programming error
Okay..thanks
 

hiegtx

Mentor
Premium Subscriber
Joined
May 8, 2004
Messages
11,972
Reaction score
4,363
Location
Dallas, TX
Circle says 5 miles hard to tell if it is correct on distance wise....
I've been involved a conversation with the OP before, both on a previous thread, and also PMs. He was able to hear Lancaster on his TRX-2, but not his SDS200. He is very close to the 'antenna farm' in Cedar Hill, where all the broadcast towers for the DFW metro area TV stations, as well as many of the FM stations, are located. Most of these towers also have multiple repeater platforms for various PLMR systems as well.

I am farther away than the OP, but have no problems hearing Lancaster, including from locations even farther north and west of my residence..
If Encrypted you won't hear them. Do you have ID Search on or off? If off than try On see if there is other activity?
Lancaster is not encrypted.

While I have not been able to confirm it, I still suspect that the issue may be caused by interference from newly activated digital TV stations. There were comments to that effect, regarding interference, in the October 2020 issue of The Spectrum Monitor. Two of the local PLMR providers, with multiple sites in North Texas, have reconfigured the frequencies they are using in part due to this interference. See this thread from the Texas forum.
 
Status
Not open for further replies.
Top