followspot2
Member
Hi all thanks for all the help so far.
* the next but i talk about is illegal what I did should you should not do what I have done!
So I got my hands on 2 UHF CB radios which i liked to together, with the speaker out of one into the microphone in on the other. one being on CB 25 and the other being on CB 28. Also other information about the radios is that they were operating at 7W and had bigger antennas put on them. I them gave it a test while it was all in front of me, where it worked perfectly. After that I took this repeater and some rope and took it to the high spot that i has selected from http://link.ubnt.com (yes i know it is not the best but it worked for finding the high spot)
I then strung the repeater up in a tree, and gave it a test where it was still working correctly. so i then wend to the station where i knew i needed to get coverage to, and gave it a test there where it worked. so then i went on my route home where i tested it all the way. but i ran into a huge issue, there a building in the way and my single would drop to nothing and i would only about 500m from the repeater. so then i tryed moving the repeater to new place with no better luck i move it 8 times. there was only one place i did not move it to which was the phone tower at the top of the hill, because 1 i had nowhere to put it into a tree, and 2 i did not want to cause any interference.
So what i have come to now is that it was a lost cause, and that i am giving up.
Thanks for every ones help and it was greatly appropriated, and i learnt a lot.
* the next but i talk about is illegal what I did should you should not do what I have done!
So I got my hands on 2 UHF CB radios which i liked to together, with the speaker out of one into the microphone in on the other. one being on CB 25 and the other being on CB 28. Also other information about the radios is that they were operating at 7W and had bigger antennas put on them. I them gave it a test while it was all in front of me, where it worked perfectly. After that I took this repeater and some rope and took it to the high spot that i has selected from http://link.ubnt.com (yes i know it is not the best but it worked for finding the high spot)
I then strung the repeater up in a tree, and gave it a test where it was still working correctly. so i then wend to the station where i knew i needed to get coverage to, and gave it a test there where it worked. so then i went on my route home where i tested it all the way. but i ran into a huge issue, there a building in the way and my single would drop to nothing and i would only about 500m from the repeater. so then i tryed moving the repeater to new place with no better luck i move it 8 times. there was only one place i did not move it to which was the phone tower at the top of the hill, because 1 i had nowhere to put it into a tree, and 2 i did not want to cause any interference.
So what i have come to now is that it was a lost cause, and that i am giving up.
Thanks for every ones help and it was greatly appropriated, and i learnt a lot.