DSDPlus dsd+ completely broken for me

[monstermatt2]

im trying to get the audio from sdr# my output device on sdr# is set to my VB-audio cable, and when i use the command in CMD dsdplus -i1 -o2 (-i1 = vb-audio cable, -o2 = headset) i don't get the cant find audio device error which was fixed in another thread , but the whole dsd+ program doesn't load all windows, and it doesn't detect the audio coming from sdr#, it was working before i installed the latest windows 10 update, and after when i installed the update, it just complete broke dsd+ and i cant no longer get it to work,

can anyone help me fix this

thanks so much

 

[a417]

have you tried using FMP in the manner that the coders of DSD+ recommended?
virtual audio cables and SDR# is a kludge and causes confusion.

You don't need to 'see the signals' as much as you think you need to...

 

[monstermatt2]

have you tried using FMP in the manner that the coders of DSD+ recommended?
virtual audio cables and SDR# is a kludge and causes confusion.

You don't need to 'see the signals' as much as you think you need to...

the FMP CC works with me sdr dongle, no problem ,but here im using the sdr# server browser to listen to other person's sdr stick, so thats why i want to get the audio coming from sdr# to feed it into dsd+ unless there a way to do it with FMP that im not aware of, all help is appreciated

 

[a417]

FMP24 allows you to make the connection to DSD+ over TCP.

This means that it does not have to be on the same computer as the DSD+ instance.

 

[ExportEh]

When in doubt, I delete it all and restart. I know, it's a pain but sometimes that's all it takes and wipes out the learning curve errors don't in setup.

But, sounds like you're going about it the hard way.
First, make sure you have the latest version of DSD+
Open SDR#.
In Audio, make sure it's set to VB cable.
Open DSDPlus.exe
Under Control, make sure you're set to Passive.
Under Output, set where you want to listen.
Under Input, set Cable Output (VB-Audio)

 

[monstermatt2]

sounds like you're going about it the hard way

i been doing it this way for couple of years, never had issues like this

In Audio, make sure it's set to VB cable.

yup i alredy set it to my vb cables

First, make sure you have the latest version of DSD+

when it downloads the new version it always says it cannot download the dsdplus.zip file. even with my anti-virus turned off

Open DSDPlus.exe
Under Control, make sure you're set to Passive.
Under Output, set where you want to listen.
Under Input, set Cable Output (VB-Audio)

every time when i open my dsdplus.exe, im always getting this error

https://imgur.com/ja67DKQ

my last resort is gonig into my google cloud backup and restore from backup to re-install dsdplus

 

[cg]

See which program is the issue...
Run FMPx and DSDPlus to verify that DSDPlus works fine. While it is running, try the update via the menu. If that refuses, it is probably an antivirus or privacy setting. Windows is usually pretty good saying what is happening or what went wrong.

Try SDR# with the speakers and an analog output into the computer's speakers to test SDR# by itself.

Then, if that is fine, try uninstalling and reinstalling VB cable

Then try them all together.

 

[ExportEh]

i been doing it this way for couple of years, never had issues like this

yup i alredy set it to my vb cables

when it downloads the new version it always says it cannot download the dsdplus.zip file. even with my anti-virus turned off

every time when i open my dsdplus.exe, im always getting this error

https://imgur.com/ja67DKQ

my last resort is gonig into my google cloud backup and restore from backup to re-install dsdplus

That is odd.
Now, I'm not suggesting it is the issue but for another completely unrelated, I had to move out of the OneDrive. Seems as though it might be more locked down within windows.

Might be worth a shot to copy your sdrsharp folder out of OneDrive and try off your local drive.

 

[Whiskey3JMC]

This has happened to my DSD+ install a few times. Usually closing the app & extracting the contents of the zip file from the latest update (I keep it in my DSD+ root directory for this exact purpose) resolves the issue for me if not resolved after reboot

 

[PDXh0b0]

run dsdplus.exe ,
control select passive digital monitor
input - select your sdr# output cable
output - select your output

you will want to uncheck listen in sound manager for your sdr# output

 

[slicerwizard]

every time when i open my dsdplus.exe, im always getting this error

https://imgur.com/ja67DKQ

Well, isn't it staring you in the face? Doesn't that error window say that DSD+ is trying to open device #3? You don't have a device #3. Tell DSD+ that you want to use device #1 (DSDPlus -i1)