crankbait
Newbie
Does anyone know if the law enforcement frequencies are encrypted in Rusk County Texas. Please let me know got a new BCD160DN Scanner and want to download them
As was noted in your other thread, several of the public safety channels (county fire) use P25, which your scanner cannot monitor.Does anyone know if the law enforcement frequencies are encrypted in Rusk County Texas. Please let me know got a new BCD160DN Scanner and want to download them
You can't monitor encrypted frequenciesDoes anyone know if the law enforcement frequencies are encrypted in Rusk County Texas. Please let me know got a new BCD160DN Scanner and want to download them
It seems like he knows that, he’s just asking if they are or not. Last time I went through they were on VHF analog and P25, but the poster above said TxWARN now so OP would need a trunk-tracking P25 scanner, preferably with Phase 2 capability because it’ll be that way in the future if it isn’t already.You can't monitor encrypted frequencies
Why doesn’t my bcd160dn not pick up the law. Does it have to be setupDid you check out the Rusk County page on RadioReference?
Rusk County, Texas (TX) Scanner Frequencies and Radio Frequency Reference
Scanner Frequencies and Radio Frequency Reference for Rusk County, Texas (TX)www.radioreference.com
Right now, the page shows all of the agencies are analog and not encrypted. It is possible that could change in the future, also could see them go trunked - which the BCD160DN does not support.
They appear to be on the TxWARN P25 system, and your scanner does not track that format.Why doesn’t my bcd160dn not pick up the law. Does it have to be setup
As noted earlier in this thread, your scanner is not capable of receiving P25 digital transmissions; several of the fire departments are licensed for both P25 (digital) as well as analog transmissions. Your scanner would only be able to monitor the non-digital fire communications. There are also talkgroups on TxWARN in use.Why doesn’t my bcd160dn not pick up the law. Does it have to be setup