• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

I screwed up, need help with a G5 & G2

Status
Not open for further replies.
rja1

rja1

Member
Premium Subscriber
Joined
Dec 14, 2004
Messages
156
Location
Enfield, NH
So I loaded a new profile, a P25 Trunked system, into my G5 & G2. I erased the old profile. Now I'm getting a speaker icon with an "X" next to it, in the lower right corner of the screen. Now I have no audio. When the pagers receive a call, I see all the info, the UID, Site name, etc on the screen, but no audio. I've been looking through PPS, but can't find what I screwed up. Help Please.

Bob / N2OAM
Radio Oasis
 
w2lie

w2lie

New York DB Admin
Database Admin
Joined
Mar 2, 2004
Messages
1,628
Location
Long Island, NY
Hi Bob,
Check your talk groups in the Group/Call tab. They should not be set to silent. Set them to tone but no tone setting.

Also - you can set a copy of an existing codeplug in PPS, so this way you always have a backup copy of your existing CP.
 
N6ML

N6ML

Member
Joined
Sep 26, 2008
Messages
1,277
In the knob position config (tab D5 in PPS), make sure that "Push to Listen" is set to "No", and that "Alert Mode" is set to "Tone" (not "Silent"). If you don't want an alert tone, configure the talk groups (on tab D4) with Alert Mode = "None"
 
Status
Not open for further replies.

Similar threads

bobruzzo
Help with DMR receiving audio from other talk groups when radio is set on 1 tg
Replies
6
Views
1K
dickie757
dickie757
K
DSDPlus Help Decoding a Digital Channel Using DSD+
Replies
14
Views
1K
DaveNF2G
DaveNF2G
K
I revived my corrupted Astro Saber without a Smart RIB! How to read/write S-records and do other things without a Smart RIB.
Replies
11
Views
1K
knockoffham
K
C
  • Locked
Need a little help with programing scanner with Sentinel for Colorado
Replies
5
Views
718
mikewazowski
mikewazowski
F
Project: 2m-70cm Mobile setup on Black Dodge Challenger. Yaesu FT-8800R - Need help with mount location without drilling and no mag mount.
Replies
16
Views
2K
jeepsandradios
jeepsandradios
Top