codeplug
Disabled Veteran, US Army
Huntsville 700/800 Mhz. - Active Control Channels
Here is what I found while scanning in Huntsville on June 16, 2012.
854.16250 This trunk system is very active.
^^ Active Control Channel: System ID: 491B / M36: 3600 baud
854.31250 Did not get a chance to monitor this system other than the control channel.
^^ Active Control Channel: System ID: 4E2F / M36: 3600 baud
771.70625 No voice traffic heard on any of the 700 Mhz. freq.’s. listed.
^^ Active Control Channel: System ID: 46B / 96: 9600 baud / T0302 - Zone 3, Site 2
Also searched the 700 Mhz. band but did not find any other active freq.’ s or control channels.
855.7125 No current CC info, only analog voice traffic heard.
^^ Active analog voice freq., I was receiving this freq. trunking on the
491B - 3600 Trunk system while monitoring Control Channel, 854.1625
This freq. was not a control channel, at least not yet, only analog voice traffic heard.
These are the only three active control channels I found while in Huntsville on 700/800 Mhz.
I also searched for any active State EDACS freq'.s or control channels but I did not find any active on 800 Mhz.
Here is what I found while scanning in Huntsville on June 16, 2012.
854.16250 This trunk system is very active.
^^ Active Control Channel: System ID: 491B / M36: 3600 baud
854.31250 Did not get a chance to monitor this system other than the control channel.
^^ Active Control Channel: System ID: 4E2F / M36: 3600 baud
771.70625 No voice traffic heard on any of the 700 Mhz. freq.’s. listed.
^^ Active Control Channel: System ID: 46B / 96: 9600 baud / T0302 - Zone 3, Site 2
Also searched the 700 Mhz. band but did not find any other active freq.’ s or control channels.
855.7125 No current CC info, only analog voice traffic heard.
^^ Active analog voice freq., I was receiving this freq. trunking on the
491B - 3600 Trunk system while monitoring Control Channel, 854.1625
This freq. was not a control channel, at least not yet, only analog voice traffic heard.
These are the only three active control channels I found while in Huntsville on 700/800 Mhz.
I also searched for any active State EDACS freq'.s or control channels but I did not find any active on 800 Mhz.
Last edited: