I cannot hear any traffic on city from police, fire, or street depts. NCDN key is activated. I am using Proscan as I am learning to use it. City zip is 72653. I need some help as I am new to this scanner. Thank you.
NEXEDGE issue
- Thread starter jrf19
- Start date
ka3jjz
Wiki Admin Emeritus
Is this what you are trying to hear...
Mike
Mountain Home Public Safety Trunking System, Mountain Home, Arkansas
Mountain Home Public Safety Trunking System Profile
www.radioreference.com
Mike
ka3jjz
Wiki Admin Emeritus
2 points here...the official ProScan support forum is here...
forums.radioreference.com
And we have an extensive wiki on learning to program these scanners, and you should query YouTube as well. Our wiki is sadly thin on handling NXDN programming though. Stick to the Nuts and Bolts section to start so you start to learn the terminology and some of the concepts
wiki.radioreference.com
I would suggest moving this thread to the ProScan forum above; you can do this by clicking the REPORT link in the lower left of the message. Make sure that folks know what system you are trying to hear.
Mike
ProScan: - Official Software Thread
ProScan Version 1.7 Build 2 includes the RadioReference Imports feature, improved Scanner Over IP, and bug fixes. Supported scanners are the BCD996T, BC796D, BC785D, BC780XLT, BC296D, and the BC250D. I'm thriving to make this the best Computer Aided Scanning program and suggestions are very...
And we have an extensive wiki on learning to program these scanners, and you should query YouTube as well. Our wiki is sadly thin on handling NXDN programming though. Stick to the Nuts and Bolts section to start so you start to learn the terminology and some of the concepts
Uniden DMA FAQ - The RadioReference Wiki
I would suggest moving this thread to the ProScan forum above; you can do this by clicking the REPORT link in the lower left of the message. Make sure that folks know what system you are trying to hear.
Mike
I see that you are trying out ProScan. Can you download from the scanner to ProScan and check the site frequencies. Do they match like in this image? Does the LCNs and RAN codes match?
Can you check the System Type? It should be 'NXDN Trunk' and not 'NXDN One-Freq Trunk'. Change it to 'NXDN Trunk' in the drop down box at the system level then set the LCNs then upload.
Probably because the file wasn't saved. You should of been prompted to save if ProScan was shut down normally.
Download from the scanner to ProScan again. No need to reboot the computer.
Was it set to "NXDN One-Freq Trunk'?
{edit} Did you set the LCNs like in the image I posted?
Hopefully you get traffic now.
Can you post an image of the frequencies?
Perhaps download from the scanner to ProScan again to verify that the upload worked last time. It sounds like the control channel is not decoding correctly possibly due to wrong system type.
It reverted back to Motorola system. I checked the box about deleting current setting and now it is the way you posted. Glory be! It is working now. Thank you very much for all your help. Now if I can get my county road dept freq to work.
Great!
- Status
