Open Scanned Channel on Tone Reveive

[KCOEM9108]

So this is what I am looking to do...

There are 2 widely used freqs that I scan but get tired of having to use nuisance delete to kill the trivial chatter, I only want to hear the dispatch with QC-II tones.

I have the tone settings that dispatch uses when giving out the call, how do I set this up so the channel only opens to voice when the radio detects the QC-II tones?

Looking to do this with both a HT1250LS and a CDM1550LS+, have CPS R06.12.02 and R06.12.04

Any guidance would be helpful.

 

[wardaddy]

Under signalling, set up a QC-II system to your specifications. Open your conventional personality and go to signalling. Set the Rx system to the QC-II system you set up and set signalling squelch to "And".

Of course, you can only have one QC-II system per conventional personality.