Pro-2052 HELP

Status
Not open for further replies.

joec157

Member
Premium Subscriber
Joined
Sep 5, 2007
Messages
25
I know I am late to the party but I am trying to revive my use of this scanner and having a problem getting it to scan in trunk mode. Also cannot put in ID's. I have tried both the original manual and the easy to read manual neither method works.My question is any software still around that can update firmware and control trunk scanning and programming ID's? Thank You.
 

joec157

Member
Premium Subscriber
Joined
Sep 5, 2007
Messages
25
I am not sure about the systems, but the frequencies are easy to enter and the radio does not error but cannot seem to enter any id's. The radio will not enter any display in the manuals so cannot get the id's in or scan the trunk system.Baffling.
 

marksmith

Member
Joined
Jun 20, 2007
Messages
4,284
Location
Anne Arundel County, MD
It has to be in a trunking mode on a valid enteted trunked system before it will accept any TGID as they are specific to a system.

Entering frequencies is not the same as entering frequencies for a trunked system. Two completely different modes.

You are probably just entering frequencies in a conventional manner, if it won't allow TGID entry.

Mark
536/436/WS1095/HP1/HP2/996T/996XT/996P2/396XT/325P2/PSR800/15X/others
 
Status
Not open for further replies.
Top