ProScan: Programming options in ProScan

[Skyd]

Hi all - so I've been doing a little bit of programming on my new Uniden BCD996P2 using Freescan. So far it's worked really well for my needs for the time being.

However - I can't find a way to set the Tone to SEARCH in freescan. I can do it manually in the scanner, but that's kind of a pain and the point of the software is to not have to muck around on the scanner for hours.

I'm wondering if anyone knows if ProScan does this? I know there's a free trial and I'll probably download that soon but I'd like to know ahead of time, as it's a limited trial.

Also - Can you record hits with Proscan? I haven't even looked to see if you can or can't with Freescan but figured I'd ask while I'm here.

 

[hunterca]

Just wondering if you can Clone an SDS100 to BCD325P2?
Also BCD396T to SDS100?

 

[ka3aaa]

yes that can be done, download from one scanner and save file, change scanner to new target scanner, swap out scanner to new target scanner, open the saved file and upload to target scanner.

i may have missed a step or some thing minor but you get the idea. its not that hard.

 

[ProScan]

Just wondering if you can Clone an SDS100 to BCD325P2?
Also BCD396T to SDS100?

ProScan set to a DMA type of scanner can import the FL from a HP type of scanner.
ProScan set to a HP type of scanner can import the database from a DMA type.

HP = SDSx00/BCDx36HP scanners
FL = Favorites Lists
DMA = Dynamic Memory Architecture

 

[hunterca]

ProScan set to a DMA type of scanner can import the FL from a HP type of scanner.
ProScan set to a HP type of scanner can import the database from a DMA type.

HP = SDSx00/BCDx36HP scanners
FL = Favorites Lists
DMA = Dynamic Memory Architecture

I guess that means the opposite direction HP to DMA scanner can be done as well?
I really like how it prints out. There is room to write in new TGIDs. One thing I do not see on the printout is the CC and LCNs.

 

[fxdscon]

I guess that means the opposite direction HP to DMA scanner can be done as well?

The above post from ProScan indicates that it can be done in both directions. It works very well.

 

[hunterca]

Thank-You

 

[ProScan]

I really like how it prints out. There is room to write in new TGIDs. One thing I do not see on the printout is the CC and LCNs.

It should print out the LCNs and Color Codes for the systems that supports them. If not then submit a bug report.
Bug Reporting

 

[dave3825]

Took a quick look at the manual, it seems entirely geared towards remote control of the scanner, recording, and streaming. I guess programming the scanner with the software is intuitive, or am I misunderstanding what proscan does.

It does it all.