WS1088: Q

Status
Not open for further replies.

Jay847

Member
Joined
Mar 20, 2017
Messages
12
Location
Elgin il
Just got my new ws1088 scanner and Idk how to program starcom 21 could someone help me out Kane County il
 

AggieCon

Member
Premium Subscriber
Joined
Nov 25, 2015
Messages
1,448
Location
Texas
From the scanner:

Start at the main menu.


  1. Go to "Program Menu"
  2. Go to "Add System"
  3. Go over a couple of times until the type is "P25" Press SEL
  4. Wait for "working.. Please wait" for a long time
  5. Go down to and select "Edit Sites"
  6. Go to 0001:New Site
  7. Go to "Frequencies"
  8. At the 01 slot, enter 855.7375 (this is the control channel for the local transmitter of the system you referenced)
  9. Once back on the frequencies page, click "Save Changes"
  10. Once back on the edit site page, click "Save Changes"
  11. Once back on the edit sites page, click "Back to system"
  12. Once back on the Add System page, go to "Add Talkgroup"
  13. The default TGID should be "Wildcard," enabled for the default scanlist. Click "Save Changes"
  14. Once Back on the "Add System" Page, click "Save Changes"
  15. Go to the main menu and select "Scan."
Note: This works from a fresh v-scanner folder. If you have changed settings, a slightly different process might be necessary. I am not aware of a method to create a new v-scanner folder from the scanner, which is a major shortfall.


Feel free to email me at Justin@DigitalFrequencySearch.com for assistance.
 
Status
Not open for further replies.
Top