sdrtrunk-vce - web interface, analytics, optimizations - Testers Wanted!

[Muxlow]

Did notice tonight running the latest build that on a P25 P2 system when 2 groups are patched its not seeing any transmissions from either groups.

I have over 400 transmissions from a dispatcher radio but shows no talkgroup info for it or any other users on that group its normaly on because its been patched with another talkgroup all day. Shows

In the web browser clicking the radio ID, info shows the talker alias, talkgroups is 0 and all the action counts have generated info. then talkgroups shows empty. activity shows everything there. Event type is call_patch_group_encrypted
Looking at the 2 talkgroups that are patched on the dashboard section both show 0 calls 0 rec 0 sent 0 enc yet the last seen is accurate

 

[BM82557]

I have Alpha 6 sitting on this system -- Frederick County, MD Trunking System, Frederick, Maryland,

RR DB has this info on freqs --



Alpha 6 reports this --



Not sure where the HISTORICAL freqs came from

 

[ExploitedSanity]

Any chance this will include a dark mode setting?

 

[Muxlow]

Any chance this will include a dark mode setting?

Check post 54 and 41

 

[BM82557]

Running Alpha 6, noticed this on start up, it may have been there all along and I just never noticed --

 

[W4KRR]

Alpha 7 is out. Much more information is shown on the main GUI for DMR and NXDN. Seems to be working very well.

 

[Fredo68]

Tested Alpha7 on the same DMR system as before. Works much better; LCNs imported and functioning. Event filtering seems good. Each CC is split on to a separate tab which I don't think helps with system overview. The display of signal and decoding rate is useful.

Issues: The Events tab doesn't kill any 'idle' channels so is quickly overwhelmed with a sea of redundant fields. The details tab doesn't appear to display the OTA info such as site number and neighbour list, only the info from the playlist. The Event tab for LRRP is still completely blank with messages and map updating fine.

From a DMR perspective, it's a big improvement!

 

[Fredo68]

Events now populating with LRRP data - not sure what the problem was earlier.

 

[W4KRR]

Suggestions for future versions:
Volume slider
Ability to retain column width resizing after a program restart
Ability to retain System sort order in the Configuration Editor

 

[Whiskey3JMC]

Suggestions for future versions:
Volume slider
Ability to retain column width resizing after a program restart
Ability to retain System sort order in the Configuration Editor

As well as the ability to retain event filter settings & column sort & position order after program restart.

 

[BM82557]

Running Alpha 6, I'm wondering why this shows 3 channels -



when this has all 6 --

 

[tylerwatt12]

Running Alpha 6, I'm wondering why this shows 3 channels -

View attachment 204598

when this has all 6 --

View attachment 204599

There's a logical mismatch between what the app sees as an active channel, and what the Live tab shows. I'm working on something to close that gap. The next alpha will also address DMR reliability by separating conventional and trunked channels, preventing incorrect channel behavior and fixing missing or combined call details. It also makes P25 and DMR system information more resistant to occasional bad signals, reducing false channels and incorrect frequencies.

 

[ncaff]

Running Alpha 7. As others have mentioned, audio decode for weaker signals has been incredible. Thank you for your work on his. I have come across two issues.

1. I have Trunking Recorder import the recordings and then review the audio through its web interface. “Conversations” are populating as one long recording and labeled with only one radio ID/alias. It will look something like:

---

Target | Target Label | Source | Source Label | Call Length
100 | Police Dispatch | 123456 | Console 1 | 11 seconds

---

When running SDRTrunk, each transmission is correctly “parsed”. The same “conversation” from above would look like:

---

Target | Target Label | Source | Source Label | Call Length
100 | Police Dispatch | 1234 | Console 1 | 2 seconds
100 | Police Dispatch | 5678 | Car 1 | 1 second
100 | Police Dispatch | 1234 | Console 1 | 7 seconds
100 | Police Dispatch | 5678 | Car 1 | 1 second

---

I did not change any Trunking Recorder settings, and haven’t seen any relevant settings in SDRTRunk–vce.


2. Calls are not being uploaded to Broadcastify. Steam Status shows “connected” and when I click “test connection”, I receive a response stating “Success! Test successful.”

 

[BM82557]

Running Alpha 6, patches on a Harris system are being displayed on DSDPlus but not on Alpha 6 --





Thought the broadcast clock was interesting

 

[Marco192]

@tylerwatt12 any chance to add Tetra support?
I am willing to help with testing or similar

 

[BM82557]

Still exploring all of the new features, very good work!! --

 

[tylerwatt12]

@tylerwatt12 any chance to add Tetra support?
I am willing to help with testing or similar

Not planned for at the moment.

Running Alpha 6, patches on a Harris system are being displayed on DSDPlus but not on Alpha 6 --

View attachment 204632

View attachment 204633

Thought the broadcast clock was interesting View attachment 204635

Harris systems, at least the ones i've seen don't have working broadcast clock. I'll create a filter for these situations

Running Alpha 7. As others have mentioned, audio decode for weaker signals has been incredible. Thank you for your work on his. I have come across two issues.

1. I have Trunking Recorder import the recordings and then review the audio through its web interface. “Conversations” are populating as one long recording and labeled with only one radio ID/alias. It will look something like:

---

Target | Target Label | Source | Source Label | Call Length
100 | Police Dispatch | 123456 | Console 1 | 11 seconds

---

When running SDRTrunk, each transmission is correctly “parsed”. The same “conversation” from above would look like:

---

Target | Target Label | Source | Source Label | Call Length
100 | Police Dispatch | 1234 | Console 1 | 2 seconds
100 | Police Dispatch | 5678 | Car 1 | 1 second
100 | Police Dispatch | 1234 | Console 1 | 7 seconds
100 | Police Dispatch | 5678 | Car 1 | 1 second

---

I did not change any Trunking Recorder settings, and haven’t seen any relevant settings in SDRTRunk–vce.


2. Calls are not being uploaded to Broadcastify. Steam Status shows “connected” and when I click “test connection”, I receive a response stating “Success! Test successful.”

Will be fixed in next alpha

Running Alpha 6, I'm wondering why this shows 3 channels -

View attachment 204598

when this has all 6 --

View attachment 204599

Will be fixed in next alpha

 

[jshg46]

Dark Mode please
Im not hearing any sound, cant find the dongle power settings.

 

[BM82557]

Alpha 6, noticed this a little while ago --

 

[jshg46]

Im getting sound now, but its repeating it twice on every call lol.