sfishy1234

[sfishy1234]

i am trying to program a radio shack pro-652 scanner to receive the green bay police and brown county sheriff frequencies but do not know what trunking system and how to add them to the scanner. these are in wisconsin. any help would be greatly appreciated. my email address is packersrule1966@aol.com

 

[GeneseeCoMI]

They're on the Sustained Interoperable Radio for Emergency Notification (SIREN) system. Instructions on how to program it are in the Owner's manual

 

[sfishy1234]

i got the channels on scanner but no squelch or any audio on it. it is a pro-652 scanner. any help will be greatly appreciated.

 

[GeneseeCoMI]

Sounds like you programmed them as conventional channels. You have to program it as a Project 25 trunked system as explained on pages 58-61 of the manual.

 

[sfishy1234]

pro-652 scanner

i still am getting no sound. it says it is scanning but no sound. it is set for p25 auto and it only shows 3 frequencies.any help would be great. even followed the owners manual on pages 58 to 61.

 

[GeneseeCoMI]

Did you put in the control channels only (the ones in red and blue)? I noticed there's four of them (771.85625, 772.10625, 772.35625, 772.63125). It isn't necessary to enter the voice channels.

Also I suggest you ask the forum admins to change this thread's title to something like "Need help receiving Brown County, Wisconsin SIREN system on Pro 652". Using your screen name for it isn't very helpful.

 

[sfishy1234]

scanner only has those 4 frequencie's on it

 

[GeneseeCoMI]

Maybe it's a reception/antenna issue. What antenna are you using? How far are you from the nearest tower? The locations are listed here and here.

 

[Nasby]

Also, you might consider buying the programming software for the PRO652.

Since you are already a premium subscriber, you could easily download the system you want to scan with the Radioreference import feature.

It makes programming so much easier and nearly flawless.

 

[GeneseeCoMI]

I just noticed there's a band plan for that system:

0. Base Freq 851.00625, spacing 6.25 kHz
1. Base Freq 762.00625, spacing 6.25 kHz
2. Base Freq 851.01250, spacing 12.5 kHz
3. Base Freq 762.00625, spacing 12.5 kHz
4. Base Freq 935.01250, spacing 6.25 KHz

Change the system type to P25 Manual to enter them in.

 

[bhamilton930]

Also, you might consider buying the programming software for the PRO652.



Since you are already a premium subscriber, you could easily download the system you want to scan with the Radioreference import feature.



It makes programming so much easier and nearly flawless.

Don't want to hijack this thread but what software is available for the pro652?? I'm also trying to find and program my scanner.

Thx


Sent from my iPad using Tapatalk Pro

 

[RDGDigital]

Don't want to hijack this thread but what software is available for the pro652?? I'm also trying to find and program my scanner.

Thx


Sent from my iPad using Tapatalk Pro

There are three software programs that will work for the PRO-652 listed in the RR Wiki here...

Object Oriented Scanner Software - The RadioReference Wiki

They all offer a fully functional 30 day free trial. My recommendation is the download all three, try them for 30 days and then register the one (or more) that you're the most comfortable using.

Hope this helps.

 

[bhamilton930]

There are three software programs that will work for the PRO-652 listed in the RR Wiki here...



Object Oriented Scanner Software - The RadioReference Wiki



They all offer a fully functional 30 day free trial. My recommendation is the download all three, try them for 30 days and then register the one (or more) that you're the most comfortable using.



Hope this helps.

It did and thank you.


Sent from my iPad using Tapatalk Pro