When you say it wont "trigger" is your radio staying quiet with no audio coming through the speaker, or is it receiving everything like its a regular channel?
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
XPR Two-Tone Pager function on XPR7550e via Quik Call II
- Thread starter thedelta
- Start date
Our OP has other Paging issues also.
forums.radioreference.com
Home Assistant Fire/EMS Tone Alert Automation
Saw this post and it got me thinking about getting Fire/EMS alerts via Home Assistant for lighting automation (ex: When a call gets paged over radio, flash my room lights red) Updated post here. How to get Home Assistant to know when I have to respond to a call? Many volunteer first responders...
Sullivan27
Member
Does anyone know if it's possible to get the alert sounds that are on the HT/EX series on a XPR series? (Standard-Tones 1-7)
firefive76
Member
If none of these suggestions have worked, I'm betting its the length of your B tone. QCII is normally 1x3 seconds. The Minitor typically alerts within a second of hearing the B tone. If I remember correctly, the 7550 doesn't alert until well into the B tone, or even at the end of it.
It's an analog system, I've verified that the tones are correct. I even used a second XPR7550e to send a quick call on an alternate frequency and it does alert, unlike when the department pushes out their tones, however. I think it is expecting 1x3 sec and not what the department pushes out which is 1x1 sec.
there's your problem
Similar threads
