Ws1065 scanner transmissions fade in and out

Status
Not open for further replies.

regor62

Member
Joined
Nov 21, 2018
Messages
9
Reaction score
0
Location
van alstyne tx
I have a WS-1065 with a Tram 1094-BNC antenna and used Win500 to program my scanner. Ive noticed that my transmissions fade in and out and I only hear bits and pieces of the received calls. The signal meter on the scanner shows a strong signal during the transmissions but the sound fades in and out. I am new to the digital scanner world but am learning. Does anyone know if there is a setting that i need to set to fix this, Thanks
 

flythunderbird

Member
Feed Provider
Joined
Oct 1, 2012
Messages
988
Reaction score
70
Location
Grid square EM99fh
Try one of the NOAA weather frequencies (the WX key) - does it fade in and out?

What are you trying to listen to? What agency/system?
 

regor62

Member
Joined
Nov 21, 2018
Messages
9
Reaction score
0
Location
van alstyne tx
it is the local police they are about 15 miles away from me not garbled just goes silent and then back again
 

regor62

Member
Joined
Nov 21, 2018
Messages
9
Reaction score
0
Location
van alstyne tx
i have 154.2500 it seams to be working better it may have just been something with the transmission from this morning
 

KeithJoseph

Still working on my amateur radio callsign.
Joined
Mar 1, 2018
Messages
343
Reaction score
7
Location
Abilene,Texas
The u.s. 1065 and a pro 136 why is it that my pro 136 picks up more than my digital scanner. I am in Taylor county Texas and on the pro 136 I can hear the jail from where I sit in potosi but it does not come up on my digital scanner
 

regor62

Member
Joined
Nov 21, 2018
Messages
9
Reaction score
0
Location
van alstyne tx
i am kinda frustrated with this radio so far. I don't know if it is my antenna or what it is. I just ordered a better antenna and hope it helps. I hear about every third word when they transmit. I hope the better base station antenna helps. I just relocated the antenna I am using to the peak of my roof but the transmissions are the same.
 

regor62

Member
Joined
Nov 21, 2018
Messages
9
Reaction score
0
Location
van alstyne tx
priority check ???

every time the transmission skips it shows "priority check " on the screen. How do I turn that off?
 
Status
Not open for further replies.
Top