firmware

Hi, I just purchased an Icom IC-F80DT, and I would like to know if I have the latest version of firmware. When I hold down my "P0" and "P3" buttons at power up, the unit displays: REV 3.0 Sum 60C4 P25 REV 2.5u I also received a copy of the programming software. It is Icom CS-F70/1700...

I am having trouble updating the FIRMWARE on several VX459 portables. I have several portables across both bands. I am trying to load FIRMARE 1.12. I am using the FIF-10A and the CT106 cable. The radios that I have trouble loading the new FIRMWARE into, all currently have FIRMWARE (1.05 and...

After updating the scanner's firmware to 1.8, I noticed that after scanning from pausing an object, random scan list numbers flash. There is no rime or reason to it. There are active, unlocked objects in the scanlists that are flashing. Anyone else expieriencing this issue or know how to solve it.

Greetings, I am having problems upgrading the firmware in my BR330T. I could really use some help. INFORMATION: Firmware Update Software: BC VUP v2.0.0.7 Firmware Version: 1.06.02 Previous Version: 1.03.xx (don't remember the last 2 digits, but it was the last firmware version for this...

Hello, I was on a forum and i read something about custom firmware for the 272g that updates the pager alert tone. I have been searching for hours now looking for the firmware but i have been unable to obtain the software. PLEASE help! I would really like to get a better alert tone other than...

Hello, for anybody that works with the Kenwood TK series radio`s i have one that im trying to figure out if its just a display problem or internal firmware update ... the screen use to display just a bunch of the icons that can be enabled (Scrambler, priority, msg, etc) now it just stays blank...

I have bought a kenwood tk-290 and the programming software. The software loads and I put in the frequencies. when I turn the radio on all I get is this frequent and random high pitch beeping noise. It did pick up something but when this beeping thing started it would not pick up anything...

Hello, Here is my issue: I've downloaded the 1.07 Firmware update and have attempted to run it but every time I get an error stating "Unable to communicate with scanner". I have verified the Com port, tried it with Win97 software and it works and made sure to hold the PGM button as I turn the...

How can i update the firmware on my vertex vx-800 on my own? I have the programming software but cannot find the firmware update. Anybody know where i could find it? Also what are the pros & cons of updating the firmware of the radio. The most important thing I like most about the VX-800 that...

Hi All, I did the firmware upgrade last night on my BCD396T and now no matter what I do the ARC396 program does not see it. I remove everything else that plugs in a com port, do directly to a Serial port instead of the USB adapter and nothing. Where do I start? Mike Rapp KA2FBL...

So I opened up my BCT15 scanner today and checked the firmware it's v 1.03.04, so I need to update it. I checked the link I found on this discussion board and doenloaded the installer and the firmware update. Useing a RS USB to Comm cable w/driver I attempted to load the firmware. I seemed to...

Hi, I recently purchased a UBCD396T scanner then later bought (off Ebay) the RH96 remote head for mounting in the car. Both units power up fine but when connected do not talk to each other. I have a good feeling the head unit has the wrong firmware on it. Can anyone direct me as to where and...

Hello, I had a question about the Software versus the Firmware on the Radio. I plan on getting an Icom F-5061 mobile Radio. The Software, which all that comes up on a Google search, is a revision 1.0, and I am unsure if this is the latest or not. Now I have heard that there is a newer version...

This can replace the current sticky. In case you've missed the other announcements, we have complete our rollout of Rebanding firmware for all supported models. All updates, including what other features were added, how to install, and the updates themselves can be found on the following...

Tried to do the firmware update on my 796d. After an error about no communication and no update, im stuck with a semi-dead scanner. Any HELP??? I can press the l/o - 6 - scan combo and power on and get back into update mode, but doesnt do me any good because i cant the update to communicate. If...

I did the firmware upgrade using the ESN updater from Uniden. The first two times it claimed there was an error checking the Flash ROM. The third time I manually cut the USB serial port's speed down to 9600, and this time it went through the laborious multiple progress bars. This time it also...