motorola

Hello, I just recently bought a XTS5000 because after doing some research I found out the cooler way to scan is by using a commercial radio! My county is in the MARCS-IP system and I want to scan it with my XTS5000. Thanks so much Edit: My radio has the cool symbol on the top left I think im...

Is it possible to program a single site of an IP site connect system as a conventional channel (only for RX)? I don't have IP Site Connect entitlement on my radio.

Hi Team, I bought a ATS2500 online. I found the CPS with help, Waris R02.03.00. When reading the radio it asks for a CPS password. The seller cant provide it. I downloaded the waris codeplug tool off the wiki reference and I can load it into a hex editor but thats about the extent of my...

Hi all, I have been burning for one of the KFDtools but since parts availability is zero, I haven't been able to get my hands on one until I found out about KFDshield. I purchased one, with the addition of the 3.5mm to hirose cable and an NTN8613C keyload adapter. I have tried it on an XTS5k...

Hi everyone! Since I've received many messages asking about the implementation of ADP decryption in OP25 (Boatbod), I decided to post it publicly here. I also received some messages stating that my code didn't work in the latest versions of OP25, therefore it wasn't possible to rebuild the...

I assembled the KFDShield, have the TRS to Hirose adapter, XTS adapter with the 2 pin jumper, and can load and read keys to the radios. When I disconnect the radio from the adapter after loading the keys I have tried changing the Channel Parameters > Key Select and there are no keys to choose...

Hello, I just received another xts5000 but when I program the simplex conventional frequencies that I use it flashes 5 times over 5 seconds and then allows me to transmit, It transmits properly when I add another zone and don't put any data in it and use the default transmit frequencies. None of...

I am hoping some one maybe able to help me with the following. We shipped a vehicle to Asia with 3nos XIR 8668i. We purchased there devices from a dealer in asia. The customer requested for advanced encryption feature to be activated. We managed to active the feature in two of the devices...

So, I've had an XPR4550 in my truck for a while now, all analog channels (oilfield and logging roads in western Canada). I found a good deal on an XPR5550e, programmed it with all the same channels (drag and drop the channel groups from one codeplug to the other in mototrbo cps), swapped it into...

Good day! Running into a complication. I've mostly been tasked with maintaining the fleet of radios we have, as we often replace radios or expand as our company expands. So we have a few different models, and I have been able to navigate, mimicking the settings just fine. However, they...

I recently received my first Motorola radio from eBay. The radio is in great condition and had a codeplug installed with everything working. I used CPS to read the codeplug and modify it to my needs. After I loaded the new codeplug to the radio, it boots like normal then shows “GOB bootloader”...

I have the modified CPS so I’m able to bring the radio below the commercial van split down to amateur radio however some stuff works some stuff doesn’t as far as the ham band goes the radio is pretty forgiving I only use the radio for receive because I listen to Los Angeles PD in Los Angeles...

Hi there! How do I decode this with my TRX-1: "Dual Capacity Direct Mode (DCDM) is a DMR enhancement that can be employed when using simplex (direct) communication between radios. When operating with a DMR repeater, the repeater provides a sync signal for the two DMR time slots. Normally, DMR...

I know the PMAE4016A is a replacement of the NAE6483AR, but I'm not sure how to tell the difference between them as they look identical, and for some reason, they're not labeled. I have some that have "MOTOROLA" on them while others don't. The ones that have "MOTOROLA" on them are taller than...

----

I have a sl7550 i am trying to get CPS 2.0 to Read / Write and I continue to get error #101005 CPS 2.0 V2.110 Radio is sl7550 Ver : r02.06.03 Any help would be greatly appreciated

Hey Everyone, Was browsing eBay and I came across this Motorola CDM1550 LS+. The listing also says its a GR500? What I'm most curious about is the box the mobile is attached too. It has some supervisor and intercom buttons. Anyone want to enlighten me on what this attachment does? Thanks

I'm currently looking to see if anyone knows which Amateur or "Ham" style radio brands/models (Hytera, Retevis, TYT, ect) are compatible with either the Basic or Advanced encryptions on the XPR 7550, or if there is a trick to maybe use decimal VS Hex in one or the other. I'm currently working...

Hi, I recently created a simple script which makes use of BrandMeister API to retrieve the the list of actual DMR repeaters and import them into Motorola DMR radios as zones, filtered by country or location. Mostly for mu own use, but I still hope it helps someone else...

I'm running a Motorola CDM 1550 LS+ with a Signalink USB via 16 pin accessory port for 911 Communications via Zello@Work, my only continuous issue I'm having is the audio varies user to user some users audio is lite others are so loud their distorted. Haven't been able to figure out why the...