motorola

Hello, they gave me 2 pagers, a Motorola GoldLine and an Advisor, in neither of them can I see the Address, I would like to be able to send a message with my SDR equipment, but I don't see it anywhere, at a hacking convention there was a pager that had his address written and we were able to...

What is the difference between the Motorola XPR 3500E and the 3500 (non e) ? I know the 3500 (non e) is discontinued but I wanted to know the difference to inquire about a use one since I already own a e version.

You can copy the below XML code, then right click in the "Zones" section of CPS 2.0 and click "Paste" and it will create zones for you for FRS and GMRS, respectively. Please note: Do not use this to transmit GMRS or FRS on non-GMRS / FRS licensed radios. Remember, FRS and GMRS are licensed to...

Hi, I'm starting to notice that a lot of agencies in Florida are slowly migrating over from Harris radios to Motorolas (portable-wise). I'm not sure whether or not it means they need to create an entire new TRS (not referring to the sites ?), I have no idea how what works. My question is -...

I own a XTL 5000 and had my firmware upgraded recently from R07, to R20. When I power down the radio for a long time and try to turn it on, the W7 head does not display. When I took the power source out, held the power button on the radio, and plugged in the power source, the W7 head display...

I recently acquired a Motorola xts3000 and managed to get a virtual box win xp vm installed. It's talking to the radio, and I have an efj 5100 that can hear the 3000 talking, plus, the 3000 can hear the 5100 and the hot spot. But when I tx on my hotspot or to the local repeater on astro, it...

Hey Guys, does anybody tried to virtualize Motorola Trunking Controller like Smartnet, CPX2000, MTC etc. ? The Controller is Sparc Hardware with Solaris 6. So virtualization could be possible with Qemu. However, I fail because of the network interface that a real controller has. Has anyone...

I have read numerous places regarding a status webpage which can be accessed by simply typing in the ip address of Repeater. Does this require a specific firmware version? I am currently on 2020.02.02. I have no problem pulling up the status through RDAC. I also am able to ping said repeater...

Charlotte County TRS database discrepancy: 1551 60f D IT TAC 1 IT-TAC-1 Public Works 1552 610 D IT TAC 1 IT-TAC-2 Public Works 1553 611 D IT TAC 1 IT-TAC-3 Public Works 1554 612 D IT TAC 1 IT-TAC-4 Public Works

I have all the wiring set up and it starts to read through the port but eventually gives a read error when its complete, does anyone know if I'm missing anything or doing something wrong? Thanks in advance for any help

Yellow Motorola HT1250 Lowband high split 6watt portable. Recent recase with no engravings or markings. Comes with fresh aftermarket battery, Motorola antenna, Motorola belt clip, and rapid charger. The only thing this radio is missing is the dust cover on the accessory port. This radio is as...

Hi, I recently purchased an XPR7550e off of eBay and I'm trying to get it setup to work with my DMR Hotspot. It is currently running Firmware Version R02.60.05 and Codeplug Version 10.01.14. I'm trying to figure out what version of CPS software I need to get for this radio as well as any tips on...

I heard from a buddy that all fire apparatus on Fort Myers Beach are equipped with MOTOTRBO XPR5550 radios in them. They all sit on a channel called "FM BEACH". Apparently the radios are used to contact officials around the FMB area.. unknown exactly WHO it is who utilizes these radios... Does...

I've been trying to find the post on batlabs for the breakdown of what each flashcode option does but can't seem to find it. Does anyone know what the Q182 Enhanced Radio Control Protocol does? Is this for trunked systems?

Hey experts, I currently am running XPR portables and mobiles for ham and commercial use on analog and DMR. We have a couple nxdn systems coming into play that are using the NX5x00 mobiles. Being able to monitor and use those systems would be nice and why I'm thinking about selling my XPRs...

I was wondering if anybody knows the frequencies for the Altamont Fair OPS? I saw they have Motorola radios if that helps.

Okay so I have a fun new radio and I got to playing with Talk Permit Tones. I'm sure someone out there has a list of awesome talk permit tones! If not, let's build one. I'll start to give you an idea 1st- 1560Hz 40ms 2nd- 1040Hz 40ms 3rd- 1560Hz 40ms 4th- 1310Hz 40ms This is a Mototrbo TPT...

Apparently Motorola has digital voice capabilities on their old trunking systems, what kind of digital voice was it since DMR didn't come out until 2005 and these systems have existed since I think the 80s to early 90s? But I just want to know what digital voice was used on those systems.

Hello all, I am hoping to try and find a solution to an issue I have been running into. When im scanning my city fire talk groups, every now and then the beginning of the transmissions will get cut off. Im not sure if it is a setting that I can mess with in CPS or if there is another solution to...

I recently purchased a Motorola PR400 (to use as a scanner for a local fire department) and I programmed frequencies as a conventional personalities. I'm able to hear them, but I would like to set up tones as the frequencies have them listed. Any guides to do so? Ps. I know its kinda confusing...