motorola

  1. W

    Quantar Multiple DPL tones?

    Hey all Quantar experts, I've searched for DAAAAAYS now and unable to find answers to this question. Long story short, I have a 300' tall GMRS repeater located in Naperville, IL. Currently it is set up with several tones (All are DPL tones) and it's been working great for my needs with my...
  2. H

    XTVA & SVR-200

    Hi all, I’m trying to figure out how to wire up my SVR-200 to my XTVA. I’ve got it all figured out except for the COR and TXing wires for the SVR. My question is this: is there a COR output on the XTVA? I’m just gonna tie the ptt and TXing lines together.
  3. S

    APX8500 Low Tx Power Issue??

    Having issues with a couple APX8500's. Programmed a codeplug into the radio then tested Tx power, but when transmitting the control head went black all of the sudden then reset. Tried testing again and the power out was only about 20-30 watts. Ive seen it before where sometimes there wont be any...
  4. T

    XTL5000 O5 High Power VHF & UHF Audio Popping??

    Good evening, I have two XTL5000 O5 high power decks one vhf, one uhf that has an annoying audio pop/thump. The problem is present anytime a button is pressed on the radio or whenever the radio received audio. The button still beeps and the audio is heard; meaning if I push a button for an...
  5. C

    Min Radio Software Requirements to work on AWIN System

    I am trying to get quotes on radios to add to AWIN system. I'm getting different software options on different quotes. I need to know what are the minimum software requirements for a radio to operate on the AWIN system. This is one quote for a portable. I know the Digital Tone Signaling is...
  6. Synapt

    APX Motorola APX 6000Li Caveats/Differences?

    I'm trying to find a solid detailed documented difference between the APX 6000 and the APX 6000Li's, as motorola doesn't seem to cover it and unfortunately our motorola rep is not even all that sure, and I was hoping someone on here might know. There was one other thread on here back in 2017...
  7. Quik-Call03B74

    Inquiry for Motorola Quik-Call™ Selective Signaling Information (2+2 2-Tone Sequential Paging)

    Hello, I am 911 Telecommunicator/Radio Collector that has taken special interest in Motorola Quik-Call™ 2+2 (QC-I) paging. I own 3 Motorola Quik-Call™ Selective Signaling T1251-B units, as well as 2 Zetron Model 25 consoles, and a Midian Electronics PDE-1 Encoder which also encodes QC-I. I am...
  8. NLACo

    Recording Motorola XTS5000 Tones

    Hello, I have a Motorola XTS5000 radio that’s a 800/900Mhz radio. I am wanting to record tones for personal use. Is there a way to enter a test mode where I could press the man down along with the PTT button or a frequency that I could use if I’m not a ham radio operator? Sorry if this is the...
  9. P

    (Novice) Preparing 28 UHF Police/EMS XTS3000 Model II For Sale. What Needs To Be Done?

    Hello All. While I have an Engineering/RF Technician (military satellites for Lockheed) background, I don't have much experience with surface radio. I recently purchased 38 Motorola XTS3000 units plus extra accessories at a local Police/Fire/EMS auction. I'll list as many details that I think...
  10. XBrandonEdwardX

    Amateur Radio in Niagara Region: New MotoTRBO CAP+ System

    Hey Everyone, I see that there's a lot of people posting pick-ups from their scanners of new/unidentified CAP+ systems in the Niagara Falls area. Though I know most of you are probably scanning for commercial purposes, I would like to let you all know that I myself and 4 other people are in the...
  11. C

    XPR4550 programming woes

    Hoping someone can shed some light on this for me. Picked up an XPR 4550, model number AAM27JQH9LA1AN. Made a programming cable. Using mototrbo cps v16 build 827. I get an error when I try to read the radio. "Error 1057, region not supported". It's my understanding that this radio and this cps...
  12. BlueDevil

    Motorola MTR2000 with Zetron HEAR Decoder Failure

    The local hospital is experiencing a failure with their HEAR (Hospital Emergency Administrative Radio) system. The system consists of a Motorola MTR2000 base station radio, a Zetron H.E.A.R Decoder, and a Zetron Model 284 tone remote unit. The issue is that received audio is not making it to the...
  13. M

    Toronto Fire Phase 2 Reception Issues all of a sudden on XTS5000

    Hi, I have been listening to Toronto in Vaughan just a few km north of Toronto. All of a sudden within the past week my radio has been dead silent, I am only picking stuff up sometimes. Prior to a week ago, I was picking up everything. Is anyone else having issues? Does it have something to do...
  14. B

    Computer cant read APX4000. Device manager gives error code 43

    So recently I bought a APX4000 UHF 1 knob version and got the APX CPS R25. I plugged the radio to my computer but my computer(windows10) can't read it. The device manager gives error code 43. I used the authentic motorola cable(PMKN4012B) to connect the radio. Everything seems fine. I don't know...
  15. R

    Programming CP200D to work with RDU4100 UHF Analog

    I have programming software for both models. I copied all frequencies on RDU4100. I wrote the frequencies to CP200D and it transmits to RDU4100 on 464.50000 but does not received on 464.50000. What am I doing wrong or what setting do I need to consider on CP200D programming software. I can...
  16. Z

    Does someone have CPS + Firmware for DTR2430 and DTR2450 radios?

    Hey guys, Long time lurker here! I've tried to find the CPS version for the DTR 2430 and 2450, as well as the firmware, but I cannot find it anywhere. So far, I've tried around 10 CPS files, but no luck.. they are all US software and those CPS versions are only working for 900MHz, not 2.4 GHz...
  17. M

    Programming Peel EMS into CPS for XTS3000

    I am trying to listen to Peel EMS and not sure what site towers I need to program into CPS for it to scan, but if someone could help me that would be great. I have an XTS 3000 VHF
  18. M

    XTS 3000 What Control Towers do I need to program into CPS for Bell Fleet Net Peel EMS too work

    Hi, I am from Canada I am trying to listen to Peel EMS and not sure what control towers I need to program into CPS for it to scan but if someone could help me that would be great. I have an XTS 3000 VHF.
  19. S

    APX NEED CLEAN/DEFAULT CODEPLUG FOR APX 7000

    I need a clean codeplug for my newly bought APX 7000 because I can't make any changes to the current one. If we have any kind soul that could help me please I'm stressed out search all over the internet lol. Thanks.
  20. Salvatorejrc

    XTS1500 Battery Indicator

    I've looked through both the user manual as well as the forums and could not find an answer for this. The battery life indicator on my XTS 1500 suddenly disappeared, not sure if I pressed something, but does anybody know how I can have it displayed again? Thanks
Top