• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Anytone Anytone 878UV Plus Band Error Problem II

Status
Not open for further replies.
N0OVC

N0OVC

Member
Premium Subscriber
Joined
Jul 7, 2022
Messages
12
Location
Minnesota
I'm getting very frustrated trying to track down the solution to my problem. I've done my due diligance in searching forum and groups, etc, but am hitting dead ends... Here's someone who had the same problem I have, but the links and solutions mentioned in this thread are dead.

Anytone 878UV plus Band Error Problem
forums.radioreference.com

Anytone - Anytone 878UV plus Band Error Problem

I recently purchased a Anytone 878UV Plus radio, when I went to program the radio with the CPS software, of course I got the "band error" message I look on Bridgecomm website to find out on how to fix this issues. Bridgecomm says to hold down the PTT button and the #1 button at the same and turn...
forums.radioreference.com forums.radioreference.com

I'm receiving a "Band Error" message while trying to upload my CPS. The solution to "Press and hold the PTT & #1", while powering on isn't working for me.
I'm running CPS version 3.0 with Firmware 3.0 also.
Thanks in advance,
Dave
 
Status
Not open for further replies.

Similar threads

E
Packet APRS HELP - Pulling my hair out trying to figure out what I’m doing wrong!
Replies
5
Views
1K
K5MPH
K5MPH
P
Making Phone Interconnect (or Phone patch) work
Replies
3
Views
514
phadobas
P
C
Motorola P25 scan/NAS questions
Replies
2
Views
753
tradecraft6f
T
rpurchases10
Anytone AnyTone AT-878UVii Plus “Diddy Diddler” mode failure.
Replies
1
Views
707
prcguy
prcguy
K
What I've learned after 26 days as a ham...
2 3 4 5 6
Replies
102
Views
7K
k7ng
k7ng
Top