BCD396XT Kent county information?

Status
Not open for further replies.

doctordave

Member
Joined
Jan 2, 2003
Messages
1,562
Reaction score
0
OK - sounds like you are squared away. Can use the RR database to decide which talkgroups you wish to program into scan lists and set those up for more selective monitoring.
 

ArmyDude

Member
Joined
Sep 5, 2011
Messages
27
Reaction score
0
I'm still not getting K EMSDSP.... does it not come accross 800 anymore?
 

h8tdigitalradio

Uniden Beta Tester
Feed Provider
Joined
Jan 2, 2003
Messages
1,128
Reaction score
80
Location
Six Feet Over
^^^ Be patient. Most Fireboard/EMS comms are on the Trunked System. There may be no calls. Delaware uses lots of Encryption, so not much to listen to. Think of Delaware as "The Private State".

As suggested, set up a Group of Channels with TGs you want to monitor and use ID Scan Mode.
 

ArmyDude

Member
Joined
Sep 5, 2011
Messages
27
Reaction score
0
I'm a volunteer EMT as well.... and hear the chatter on EMSDSP through the VHF re-broadcast... I just haven't heard it on my scanner. Just making sure I do have it set up correctly and that I didn't miss something that is causing that specific TG to not come accross at all.
 

doctordave

Member
Joined
Jan 2, 2003
Messages
1,562
Reaction score
0
Interesting. You are still operating in ID SEARCH mode and the radio is not transiently hanging up on other talkgroups (perhaps without audio)?
 

h8tdigitalradio

Uniden Beta Tester
Feed Provider
Joined
Jan 2, 2003
Messages
1,128
Reaction score
80
Location
Six Feet Over
Check and make sure you have the correct TGs, and you don't have the TGs you want to monitor Locked Out.
 

doctordave

Member
Joined
Jan 2, 2003
Messages
1,562
Reaction score
0
Dave, it sure is amazing how much of the DE system has become encrypted now - - very unfortunate. When I was passing through NCC a few days ago, testing my 536HP, it seemed that NCC PD's primary TG was strapped secure about 95% of the time.
 

ArmyDude

Member
Joined
Sep 5, 2011
Messages
27
Reaction score
0
I had a completely wiped radio with nothing locked out and still didn't hear K-EMSDSP. I do have it programmed as a channel, I'm just waiting for the next call to come through before I give up on search mode and go back to ID Scan mode.
 

h8tdigitalradio

Uniden Beta Tester
Feed Provider
Joined
Jan 2, 2003
Messages
1,128
Reaction score
80
Location
Six Feet Over
Dave, it sure is amazing how much of the DE system has become encrypted now - - very unfortunate. When I was passing through NCC a few days ago, testing my 536HP, it seemed that NCC PD's primary TG was strapped secure about 95% of the time.
NCCPD is Encrypted FOREVER! The reason: Smartphone Apps! Yes, we cant have the bad guys listening to a delayed police call with no control of what is streamed. Very efficient way to avoid capture. Again, Delaware is "The Private State"
 

doctordave

Member
Joined
Jan 2, 2003
Messages
1,562
Reaction score
0
As Dave suggested - confirmed that you don't have locked-out checked for that particular TG.
 

doctordave

Member
Joined
Jan 2, 2003
Messages
1,562
Reaction score
0
Very unfortunate, Dave. Agree on the lack of logic in all of that. I sure hope the 3 primary DSP "Command" channels are not next in line. Have the County and Statewide PMA TGs been left in the clear?
 

doctordave

Member
Joined
Jan 2, 2003
Messages
1,562
Reaction score
0
So you are running in ID SCAN mode - - and the scanlist in which EMS Disp appears is enabled?

Or are you still in ID SEARCH mode while not getting a peep on that TG?
 

ArmyDude

Member
Joined
Sep 5, 2011
Messages
27
Reaction score
0
Fortunately for the civilian populace.... EMSDSP has been silent period.... Unfortunately for me, I have to wait in ID search mode to make sure that I still hear it. The other TGs I have in that group, K-EMSOP1 for instance, are coming through on ID SEARCH without issue. It's just K-EMSDSP that I'm not hearing
 

h8tdigitalradio

Uniden Beta Tester
Feed Provider
Joined
Jan 2, 2003
Messages
1,128
Reaction score
80
Location
Six Feet Over
Reviewed all of the locked out channels... that TG 11536 is not listed in the L/O list.
Hello,

Add K-FIRE 1 and K-EMSOP 1 to your Scan List or Group. Some EMS Calls are routed on these TG's. There are MDT's or CAD's in the response vehicles as well.
 

ArmyDude

Member
Joined
Sep 5, 2011
Messages
27
Reaction score
0
Hello,

Add K-FIRE 1 and K-EMSOP 1 to your Scan List or Group. Some EMS Calls are routed on these TG's. There are MDT's or CAD's in the response vehicles as well.

Done that. As stated before, I am a volunteer EMT and familiar with the system enough to be dangerous. I also worked for DE DIVCOM when the motorola system was being installed many years ago. Of course I have lost most of that knowledge, but being a computer programmer by trade, it's not too hard to grasp. It's just annoying that this scanner worked beautifully before I deployed and now they have to change stuff up. Oh well. guess that comes with the times.
 

h8tdigitalradio

Uniden Beta Tester
Feed Provider
Joined
Jan 2, 2003
Messages
1,128
Reaction score
80
Location
Six Feet Over
^^^ If you still have contacts at DIVCOM, they may be able to help you with your concerns. The only changes are NPSPAC Rebanding, and more Encryption, lots of it. The TG may no longer be used.
 
Status
Not open for further replies.
Top