Gloucester County 700 Mhz P25 Phase 2 !!

[adeangelo101]

They are for Camden County mutual aid responses. Just their fireground operations though, we dont have their response channels yet like "West Ops".

 

[fireguyastro]

Hey guys I'm having problems seeing the trunk system on my scanner I loaded then new database is there something I'm missing i should be. Seeing the signal indicator on the scanner for the system


Sent from my iPhone using Tapatalk

 

[policefreak]

What scanner are you using?

 

[fireguyastro]

536hp


Sent from my iPhone using Tapatalk

 

[W2SJW]

Scrap my previous comment!

I just updated the master DB in my copy of Sentinel & the FD & EMS TG's are there. Not sure why you're not hearing anything.

I thought the FD & EMS TG's missed the last Monday DB update - I was going to suggest that only the encrypted LE stuff got loaded into your scanner, and that's why it wasn't stopping on anything...

 

[policefreak]

Do you have the right service types turned on?

 

[mding4gold]

BCD536

I have imported the database from Radio Reference. I have the favorite running on the unit. I am hearing the encrypted channels, I have since avoided them. I cannot hear any fire or EMS chatter. I have F1 up and know there have been units dispatched, but no voice on any of the Fire/EMS channels.

What can I be missing? Any ideas?

 

[phillydjdan]

It's the crap-tastic scanners, guys...

 

[joey123]

I cannt hear the system from Cherry Hill New Jersey

 

[MilAirNJ]

unknown tg's

TG's 322,401,410 keep popping up.

They are encrypted but not in the database. Anyone have an idea?

 

[bstanleyWFD]

Yea I also picked them up a lot while in Discovery Mode. Just stating the obvious here...but it's got to be some sort of Law Enforcement TG. Just can't figure out who.

 

[jcardani]

I'm going out on a limb here but they could be ISSI dynamic link talkgroups linked to Camden County's encrypted police talkgroups. But to would impossible to verify unless you know some one in communications.

TG's 322,401,410 keep popping up.

They are encrypted but not in the database. Anyone have an idea?

 

[FirePD]

Incase anyone was wondering, there is in fact 6 un-monitored Fire ground Channels for the new system. However they are conventional/digital layouts. I took the time and tracked all 6, included is a screenshot with how I programmed it on my scanner. These channels as I said are not monitored by the county, and they don't run off the antenna sites so they're only good for about a half mile in radius since they just work from radio to radio only, but I feel if your near the scene they are important to have as the County has asked for everyone to operate on them to avoid jamming the Fire 1-6 main channels.

I have these freqs in my group for Gloucester Co. Fire, is there a way to name them (such as FG1, etc. as in the pic) on my BCD325P2 ?

 

[Skypilot007]

Since they're not in the database you'll have to go thru the menu in the scanner and alpha tag them by hand.

 

[FirePD]

Since they're not in the database you'll have to go thru the menu in the scanner and alpha tag them by hand.

Any idea how I do that? This new scanner is wayyyyyy different than the old ones I've had

 

[Skypilot007]

Any idea how I do that? This new scanner is wayyyyyy different than the old ones I've had

Go thru the menu to select the system, group, channel where you have the channels stored and select edit channel name.

This document may be helpful also. I know its for the 996P2 but the menu system is the same.

Easier to Read BCD996P2/XT Digital Scanner Manual

 

[Skypilot007]

I found the link for the 325P2, here ya go.

Easier to Read BCD325P2 Digital Scanner Manual

 

[FirePD]

I found the link for the 325P2, here ya go.

Easier to Read BCD325P2 Digital Scanner Manual

Thank you for that!

 

[WQUQ246]

Radio ID's

I had A Buddy Of Mine Give Me A Copy Of This Thought You Guys Could Use It

 

[jimmie13]

I cannt hear the system from Cherry Hill New Jersey

I can hear the dispatch in Cherry Hill New Jersey