Hold Time

[Bucko]

I am using FreeScan with my BCT15 and I want to increase the hold time when a TG is on. I see a delay time on the system and a hold time on the site. Am I correct assuming that the hold time on the site is the correct one to use (it does not seem to effect it much)? I was guessing that the delay on the system was for delay on each Frequency in the system.
Thank you for your help

 

[cpuerror]

You are correct. Increasing the delay time wil make the scanner stay on an individual TG for longer, and the hold time means how long it will scan that system for if there is no activety.

Edit: Got the two backwards...

 

[WX5JCH]

Wrong, use hold time for the amount of time you want to stay parked on a system. Delay time is just like old scanners, you will want 2-3 seconds as your settings per taste.