• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

HT1250 CPS programming error

Status
Not open for further replies.
SlipNutz15

SlipNutz15

Wacker
Feed Provider
Joined
Aug 6, 2005
Messages
633
Location
Central PA
I had a friend ask me to program his HT1250-LS the other day.

I have programmed many of these radios in the past so I knew what I was doing.

I filled out 16 channels to mirror the local FD's radios and verified no errors in the error log before saving the codeplug and programming. When I went to program, the radio did its usual "Test Mode" on the display and then an error box popped up on the CPS saying the FCC 12.5 mandate is in effect and if I need to program 20/25khz for whatever reason I needed to contact Motorola.

All the channels are in 12.5 as were the previous channels that were in the radio. I don't know where to look to fix this error.

I thought my CPS was messed up so I programmed another HT and it worked perfectly.
 
B

btromp

Member
Premium Subscriber
Joined
May 30, 2013
Messages
9
Location
Eastlake, OH
Change the bandwidth settings in the trucked site list. Even the ones that are disabled


Sent from my iPad using Tapatalk
 
S

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Location
Virginia
If any personality is checked rx only be sure to unchecked those temporarily, then set the bandwidth to 12.5 then re check to rx only along with mentioned above.
 
Status
Not open for further replies.

Similar threads

R
CPS 2.0 Error Code #101005 (Again...)
Replies
1
Views
313
a417
A
BabaDude77
How to enter radio IDs in CPS for a Motorola Type 2 Smartzone system. (XTS5000)
Replies
5
Views
407
BabaDude77
BabaDude77
W
CP125 CPS Programming Software
Replies
5
Views
477
mbnv992
M
J
Can't find FPP/Protection tab for XTS2500 M3 in Astro 25 R20
Replies
2
Views
233
kayn1n32008
K
K
Quansheng UV-K5 (8) Password for CPS
Replies
18
Views
998
nonos66
N
Top