Is there a way to...

[seth21w]

Lockout one slot of a dmr channel or only hear the audio that passes on a either slot?

 

[seth21w]

Like for instance program cc5 slot1 only on a dmr frequency? This is on my 536 btw.

 

[jonwienke]

Why? In general you should filter traffic by talkgroup, not frequency or timeslot.

 

[seth21w]

Because the traffic on s1 is clear and s2 is encrypted

 

[Ubbe]

The 536 automaticly skips the encrypted transmissions.

/Ubbe

 

[marksmith]

The 536 automaticly skips the encrypted transmissions.

/Ubbe

Interesting to hear it apparently does this in DMR systems. It DOES NOT skip encrypted transmissions from a Phase 2 P25 system.

Mark
536/436/WS1095/HP1/HP2/996T/996XT/996P2/396XT/325P2/PSR800/15X/others

 

[seth21w]

It doesnt silence dmr encryption i dont know where he got his info but hes wrong.

 

[werinshades]

Lockout one slot of a dmr channel or only hear the audio that passes on a either slot?

Make sure you program it as DMR One Frequency and not in conventional mode. Program in the talkgroup via Sentinel and under TDMA Slot select the one you want to listen to. Run it in ID Scan Mode and you should be set.

 

[seth21w]

Ok thanks wearinshades!

 

[BigC801]

Why would you want to? So you can lock out slot 1 and scan a system as conventional channels.

The X36hp scanners do a poor job of scanning TIII systems so that is why i would like the option...

And you can lock out or scan just one slot on the TRX 1 & 2 Scanners. IF we could just melt the 436hp and TRX 1 together then we might have the perfect scanner.

 

[seth21w]

Maybe upman can add the additional option in a future firmware release to add selection of slot 1 or 2 in the fpp.

 

[jonwienke]

Why would you want to? So you can lock out slot 1 and scan a system as conventional channels.

The X36hp scanners do a poor job of scanning TIII systems so that is why i would like the option...

The bugs currently affecting DMR trunked system reception also affect One Frequency systems, so you gain NOTHING by doing this. Uniden is working on the issues and will likely have a fix out next week. Have a bit of patience and program the system for what it is.