• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Kenwood NX-5300

Status
Not open for further replies.

zsauve

Member
Premium Subscriber
Joined
Jun 24, 2010
Messages
167
Location
Oak Creek, WI
Where can I buy a NX-5300 portable radio from as well as what would the cost be for having options for P25 conventional, Nexedge Conventional, analogue conventional and LTR trunking?
 

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
2,809
Location
Florida
Ltr is not available yet. Forthcoming. Your looking at 1300 roughly. Basic options/selection.

Also where are you? Software sales is restricted in the US. We can not sell to Canadian users.
 

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
2,809
Location
Florida
Version 1.50 is due out shortly, it will now do LTR, some more MDC-1200 stuff, and fleetsync per zones (multiple id's)
 

zsauve

Member
Premium Subscriber
Joined
Jun 24, 2010
Messages
167
Location
Oak Creek, WI
Ltr is not available yet. Forthcoming. Your looking at 1300 roughly. Basic options/selection.

Also where are you? Software sales is restricted in the US. We can not sell to Canadian users.

I am located in Milwaukee WI, so i dont think there should be any issue with getting the software
 
Status
Not open for further replies.
Top